Works well. Just got it today, sharpened two pocket knives, one a 8Cr13MoV Chinese steel, the other s30v American steel The stone made short work of both steels (which were pretty sharp already). But notably was able to make the s30v hair shaving sharp easily, something I've had trouble with. Inexpensive and useful, I love this stone. It's not the Ninja sharp 8000+ grits that you can find, but for pocket knives and EDC, it's perfect and inexpensive. Get One!!!!!!!!!!!!

Put the pointed, narrow end of the sharpener up against the open end of the gut hook. The narrow, pointed end of the sharpener should face in toward the thickness of the blade, away from the edge of the gut hook. Match the angle of the sharpener to the original edge angle. This will maintain the correct sharpening angle and prevent you from getting cut by the blade tip. Hold the same angle when sharpening each side of the gut hook.
While it may still feel like there is a lot to choose from, you don’t need a lot of of stones, you just a several good varieties to choose from. To summarize I will indicate below what my favourite stones are in each grit. Yes you can mix up the brands when sharpening but my recommendation is to buy a combination of 2-3 stones of the same brand and go from there.
Cutting angle – With a manual stick or sharpening stone you set the angle yourself so this does not factor into the equation when choosing that type of sharpener. When shopping for an electric sharpener however it does. You’ll want to decide if you want your knives to have the 15 degree “Asian” style angle so that you can make precise cuts or the Western standard 20 degrees or 22-degree sharpening angle. Most people will opt for the 20 or 22-degree angle simply because their cuisine doesn’t call for a lot of finesse from their knives and those knives are probably of a heavier Western variety anyway.
Visually, a very sharp knife has an edge that is too small to see with the eye; it may even be hard or impossible to focus in a microscope. The shape near the edge can be highlighted by rotating the knife and watching changes in reflection. Nicks and rolled edges can also be seen, as the rolled edge provides a reflective surface, while a properly straightened edge will be invisible when viewed head-on.

The type of stone refers to the material it is made with. You can find many different types, including diamond, ceramic, natural stone, and synthetic. I would only suggest diamond if you’re planning to be sharpening only ceramic knives. Many of the stones you’ll find on Amazon or other retails are made of Corundum, which is a crystalline form of aluminium oxide. It’s a fine choice for a beginner sharpening stone.
1. Diamond Stones. I’ve used two, many years ago, to sharpen steel knives & found that the diamond coating wore away. They did work well at first, but then I was sharpening on the backing material. This puzzled me, because diamond is harder than steel, but have only recently read that the diamond particles are torn off the backing material because they stick to the softer steel. Diamond stones are recommended for sharpening ceramic knives only. This info about diamond stones & steel knives I got from an Edge-Pro article.
Vielsalm Coticule on the other hand generally occurs in much more narrow layers sandwiched between the slate layer and the Belgian Blue layer and thus, it is both less plentiful and more expensive than Belgian Blue stone. Also, Coticule is divided into different grades and sometimes displays blemishes on the surface due to its proximity to the slate layer. Furthermore, it is somewhat harder than Belgium Blue stone and, due to its brittleness, it is bonded to a substrate layer of hard slate prior to sale to prevent the stone from breaking during use.
Feedback is something that is very important to most sharpeners, i.e. how the stone feels when you are using it. Does it feel smooth, creamy and silky or does it feel hard and scratchy. While feedback, pleasant or unpleasant may be a purchase deterring factor it really doesn’t have any effect on level of sharpness that the stone can deliver. Unless of course the feedback is so distracting that it hinders the sharpeners focus and enjoyment and as a result, the sharpener doesn’t like what he/she is doing so that ultimately it does have the potential to negatively impact the results.
A blade's sharpness may be tested by checking if it "bites"—begins to cut by being drawn across an object without pressure. Specialized sticks exist to check bite, though one can also use a soft ballpoint pen, such as the common white Bic Stic. A thumbnail may be used[3] at the risk of a cut, or the edge of a sheet of paper. For kitchen knives, various vegetables may be used to check bite, notably carrots, tomatoes, or cucumbers. In testing in this way, any nicks are felt as obstacles.
It is better to understand the difference in sharpening stone materials before you are going to make any decision. Among the available options in the market today, Waterstone, oilstone and diamond stone are the most common type of sharpening stone. Each of stones comes with advantages and disadvantages. Waterstone and oilstone are available in natural and synthetic models. Synthetic are the most common and easy to find as man makes them. As the use of natural stones (e.g. original Arkansas or Japanese natural whetstones) is has diminished in popularity, they are beginning to rare in the market. Artificial stones have a more consistent particle size and controlled with a tight mechanism in providing high-quality sharpening stone.
I had wanted a pair of sharpening stones for a while, so was enthused to get this last week. I watched a bunch of YouTube videos on how to use them and a deburring strop I also bought and wow, my kitchen and pocket knives are now wicked sharp. Pro tip: if you post anything about it on social media, family and friends will almost surely volunteer their knives for more practice...
Why, then, do so many of us shy away from the task? To put it bluntly, it's because it's a rather daunting process for the beginner. Your image of knife sharpening may consist of a hyper-masculine chef slashing away violently at a steel rod (we're looking at you, Gordon). Conversely, you might have seen cooks meticulously and methodically stroking their blade up and down a Japanese waterstone with more intricate attention to detail than a Flemish landscape. 
Beginning on the right side of the knife, move from tip to heel and heel to tip, then flip the knife and repeat. For the left side, it’s opposite—start at the top of the stone to reach the heel area completely. So, you will move from heel to tip and then tip to heel. Remember to apply and release pressure as you did earlier, exactly the same as in Step 2, but with light, refining pressure.
Prior to using any kind of sharpening stone, it is advised that individuals soak the sharpening stone in light machine oil or household oil for at least 12 hours before being used. Before being used, it is advisable to wipe the surface of the sharpening stone to get rid of grime, grit or dirt that may have accumulated overtime during the time of storage.
The goal when sharpening is to create a burr, which is a tiny whisper of metal left on one side of the blade. You'll know you have a burr when you can feel one smooth and one scratchy side to the edge. Warner's is formed in no time at all; I struggled. Nevertheless, eventually I got there. Once you've got the burr, it's time to move on to step three.

Siliciclastic stone is a clastic, noncarbonate, sedimentary stone that is almost exclusively silica-bearing and exists as either a form of quartz or, another silicate mineral. In addition, hardened clay is also a sedimentary stone but, it is formed from organic materials such as plant and animal matter and thus, it is much softer than Siliciclastic However, when silicon sediment is suspended in a clay matrix and then naturally hardened over thousands of years, it forms an excellent whetstone material; although, it is somewhat softer than Novaculite. Thus, because the geology of Japan once held large deposits of this type of stone it has been used for hundreds of years for sharpening tools, knives, and swords. However, unlike Novaculite, Belgian Blue, and Coticule, both natural and synthetic Japanese whetstones use water for lubrication and thus, they are commonly known as “Japanese Water Stones” because this type of stone is very porous. Thus, natural Japanese Water Stones must be soaked in water for up to twenty-four hours prior to use whereas, synthetic Japanese Water Stones can be soaked for only a few moments.

Ease of use – Most people in search of a mechanical sharpener want one because they don’t want to be bothered with trying to achieve a perfect edge themselves using a stick or sharpening stone. They want predictable, first class results every time. In that case it’s important that the electric powered device is easy to use, achieves results quickly and with little effort and is designed with user safety in mind. Keep in mind too that it’s easy to apply too much pressure when using a mechanical sharpener and when that happens you’re likely to see unsatisfactory results. In addition there are subtle differences between mechanical devices designed for Asian-style knives and those designed for Western-style knives. This has to do with the sharpening angle discussed above. Don’t get an Asian sharpener if you don’t need precise control over your cuts.

We’ve shown you how to keep knives sharp before, and even discussed why water stones are best, but this crash course is quick, fast, and gets to the point. In most cases the most the average person at home can do is either hone their blade with a honing steel, which straightens and lines up the blade’s edge, but it doesn’t sharpen it. Alternatively you could run it through a handheld or electronic sharpener, but depending on the model you use it can do more harm than good.