With its premium series Select II, the whetstone manufacturer Sigma Power Corporation from Tokyo addresses users of high-alloy steels such as HSS. These stones, too, are obviously intended to engender a grinding experience similar to that of natural stones. The special production process is expensive, but the Sigma Select II probably has no equal when it comes to demolishing steel.
1. Diamond Stones. I’ve used two, many years ago, to sharpen steel knives & found that the diamond coating wore away. They did work well at first, but then I was sharpening on the backing material. This puzzled me, because diamond is harder than steel, but have only recently read that the diamond particles are torn off the backing material because they stick to the softer steel. Diamond stones are recommended for sharpening ceramic knives only. This info about diamond stones & steel knives I got from an Edge-Pro article. 

High Grit Stones: These are also known as finishing stones with the number range going up to 8000, and give you a super refined edge.  They work great with Western knives as they cutting edge resembles a “U” as opposed to a “V”. If you are using your knife to cut meat, then you can happily stop at 4000 or 6000 grit. If you are only using it for vegetables or fruit go all the way to the 8000.
Now it's time to polish. This is when you'll swap over from the coarse grit to the finer grit (make sure this side is wet, too). I found the knife still had a bit of grime on it, so I gave it a wipe clean beforehand. The motion is exactly the same as with sharpening, but you can apply slightly less pressure, and limit to roughly 30 strokes on each side. 
A single stone of 120 grit and a combination stone of 1000 and 3000 grits come along with a stone holder all for a price of less than many other individual stones. The stones are 6 7/8" long and 2 1/8" wide. A flattening stone of some kind would be needed, but with economical options available in those, the overall price of this kit would still be low. This entry level set is a good budget minded option.
I had wanted a pair of sharpening stones for a while, so was enthused to get this last week. I watched a bunch of YouTube videos on how to use them and a deburring strop I also bought and wow, my kitchen and pocket knives are now wicked sharp. Pro tip: if you post anything about it on social media, family and friends will almost surely volunteer their knives for more practice...

To take off the fine scratches and burrs left by coarser stones, and to polish the surface, you can use stones starting at around 2000 grit. There is theoretically no upper limit, but stones above about 10000 grit achieve practically no measurable improvement in the edge. It is also interesting to note that above 8000 grit, there is no Japanese measurement standard. For stones labelled as having a finer grit, you simply have to take the manufacturer's word for it.
All stones require either water or oil as a lubricant to sharpen the knife. We prefer water stones because they’re easier to use, less messy and don’t have the possibility to go rancid like oil does. If you choose a water stone, all you have to do is either add water to the stone before placing the knife on the surface, or soak the stone in water for 10 minutes before use. You’ll want to read the instruction for the stone you purchase to find out how to use it properly.
Oil stones have been around a long time, and while not as popular as in the past, they are still a practical option. Not as fast as the other stones, they are easy to use and their lower price makes them a good value for the budget conscious. With oil stones, the relation of the types and grits can be confusing. Our article, Difference in Sharpening Stone Materials, provides a more in depth explanation, but in general an India stone or two combined with an Arkansas stone is a good combination to start with.
A good whetstone and a little practice will keep all of your knives sharp and in perfect condition. The beauty is that it doesn’t take much effort to learn, just a good bit of practice to get the angle right and keep a consistent angle while you’re sharpening. Whetstones are available in department stores or online, and while they range in price based on the fineness of the grit, this thread at eGullet can help you pick a good grit to start with.
This 600/1,000 grit is my second Unimi knife sharpener, the first is 2,000/6,000 grit and I love them both. Both stones together produce very sharp and well polished knives that reduce the cutting effort and save time in the kitchen. I particularly appreciate that the manufacture printed the grit number on the side of each stone - that helps use the different grits in the proper sequence from the coarser to the finer. The stone comes with a non-slip silicone/rubber base which is very handy.
Stropping a knife is a finishing step. This is often done with a leather strap, either clean or impregnated with abrasive compounds (e.g. chromium(III) oxide or diamond), but can be done on paper, cardstock, cloth, or even bare skin in a pinch. It removes little or no metal material, but produces a very sharp edge by either straightening or very slightly reshaping the edge. Stropping may bring a somewhat sharp blade to "like new" condition.
The truth is that there is no one recommendation that we can make that will meet everyone’s needs. Every sharpener’s needs are different and every sharpening toolkit will be different. In order to help beginning sharpeners get started with good sharpening stones to build around, we need to understand their individual needs. So with that in mind, let’s look at the basic needs of a beginning sharpener.
In addition, there are three broad grades of Japanese Water Stones consisting of the Ara-to (rough stone), the Naka-to (middle/medium stone) and, the Shiage-to (finishing stone). However, it should be noted that the various grades of natural Japanese Water Stones vary widely in both density and grit size from stone to stone and thus, they do not translate well to American or European abrasive standards. Furthermore, because they are significantly softer than Novaculite, Japanese Water Stones must be flattened more often and do not last as long as a either Novaculite or Coticule stones. But, because they form a slurry of fine particles when used, they also do a superior job of both cutting and polishing.

Cutlery is essential to the operation of every commercial kitchen, so it is important to know the best techniques for kitchen knife handling and safety. Proper knife training can help minimize the risk of personal injury and keep your kitchen running smoothly. If you are just beginning to learn or simply need to brush up on your approach, keep reading for some helpful knife safety tips. 1. A Sharp Knife Is a Safer Knife When you use a dull knife to cut, you need to apply more force. As a result, the knife is more likely to slip and increases the risk of injury. Keeping your knives sharpened is one of the easiest ways to keep them safe. Simply use a sharpening stone or knife sharpener to maintain the original precision of the blade. If your

Though "whetstone" is often mistaken as a reference to the water sometimes used to lubricate such stones, the term is based on the word "whet", which means to sharpen a blade,[1][2] not on the word "wet". The verb nowadays usually used to describe the process of using a sharpening stone is to sharpen, but the older term to whet is still sometimes used. The term to stone is so rare in this sense that it is no longer mentioned in for example the Oxford Living Dictionaries.[3][4] One of the most common mistaken idioms in English involves the phrase "to whet your appetite", too often mistakenly written as "to wet". But to "whet" quite appropriately means "to sharpen" one's appetite, not to douse it with water.

Chefs will do this every day, and there's no reason you shouldn't too. Before cooking, or after you've done the washing up, honing your knife will help keep it in good condition. "When you're using a honing steel, you're not actually removing any metal at all, just re-straightening that edge, to get it back in line," says Authbert. Remember that you'll still need to sharpen it every two or three months. 
TO USE: Soak stone in water for no more than 5-10 minutes. Place stone on a damp cloth with the courser 400 grit side (dark green) facing up. Hold the knife so that it’s flat and perpendicular to the block, with the blade facing left. Holding the knife at a 20-degree angle, slowly sweep the edge of the blade from left to right down the length of the stone and continue until sharp. If stone starts to feel too dry, add more water. Be patient and take your time. Flip knife over and repeat on the other side (now moving from right to left). Be sure to sharpen both sides evenly. To polish the blade further, flip stone over to the fine 1000 grit side (light green) and repeat the process. When blade is honed to desired sharpness, wash and dry your knife. To clean your stone, simply rinse with water, wipe away any remaining metal residue with a rag, rinse again, then dry.
The DuoSharp Plus stones are nicely sized at 8” long by 2 5/8” wide and have two grits on each stone to maximize value. The Plus in the name refers to an area of continuous grit in the otherwise interrupted grit surface of the stone. This area is for sharpening edges with fine points that might be difficult on the interrupted surface. A coarse/fine DuoSharp Plus stone is a good single stone to start a sharpening toolkit.
This set of two Norton combination waterstones provides four grits and also includes a flattening stone as an added value. The 220, 1000, 4000 and 8000 grit sides will handle everything from aggressive shaping to final polishing. They are 8" long by 3" wide, big enough to handle most knives and tools easily. Our most popular waterstone kit, this has everything you need to both sharpen with waterstones and maintain the stones themselves. A great starter set.
Cost – While you can get a perfectly serviceable sharpening stick or stone sharpener for short money and some very high-quality tabletop manual 2 and 3-stage sharpeners for less than $50, high-quality mechanical systems will often run you $200 or even more. While that’s not so much money it’s likely to impact the quality of your life it is a lot to pay to keep a decent edge on your knives. While how much you ultimately pay for a sharpener is entirely up to you, you may want to consider your commitment to cooking and how often you are actually liable to use the device. If this is your first sharpener you might also want to consider learning how to sharpen a blade using a classic stick or stone sharpener first, before deciding if moving up to a mechanical sharpener is the right thing for you.
While it may still feel like there is a lot to choose from, you don’t need a lot of of stones, you just a several good varieties to choose from. To summarize I will indicate below what my favourite stones are in each grit. Yes you can mix up the brands when sharpening but my recommendation is to buy a combination of 2-3 stones of the same brand and go from there.
Honing is kind of like dusting the furniture while sharpening is more like reupholstering the furniture. Honing is purely a maintenance activity that should be regularly practiced to make sure the blade is clean and sharp as can be every time you use it. It’s easily done using a honing rod, a leather strop or a sharpening stone; as most stones have a side for sharpening and a side for honing. Honing is akin to trimming your hair to remove the split ends. It’s not a full on haircut. What it does is realign the tiny sharp protrusions along the edge of the blade that can be bent over with use, so that they stand more or less straight.
We're not completely sure but we think we now have the largest selection of sharpening stones on the face of the earth. If you're interested in something and don't see it here please contact us and we'll try to get it. Most of the stones you see here are Japanese water stones, both synthetic and naturals. There is also a wide selection of stone holders, flatteners, and other items that will help you get a razor sharp edge on all your sharp tools and knives.
I recommend it as a lightweight alternative to larger stone for smaller knives. Leather necklace is comfortable and seems strong. I conditioned it for suppleness and swim with it on tightened as a choker. Stone is small, dog-tag size. I use it with water. Functional for small folder knives and multi-tools. Not useful for large fixed blades, since you can't make a long stroke. Small to grip. I use double-sided tape on one side to keep it in place on a flat rock. Not sure of grit, seems like around 1000. It took a while, but i got my old boy scout knife sharp.