Low Grit Stones: A sharpening stone with grit number less than a 1000 is generally used for knives and tools that are damaged. If your blade has any nicks or chips in the blade, the stones will take care of them in a jiffy! They usually have a coarse side for nicks and chips, with the other side for general sharpening. Even if the knife’s edge has become totally blunt, the stone will re-sharpen it perfectly.
1. Diamond Stones. I’ve used two, many years ago, to sharpen steel knives & found that the diamond coating wore away. They did work well at first, but then I was sharpening on the backing material. This puzzled me, because diamond is harder than steel, but have only recently read that the diamond particles are torn off the backing material because they stick to the softer steel. Diamond stones are recommended for sharpening ceramic knives only. This info about diamond stones & steel knives I got from an Edge-Pro article.
Keep your knife razor-sharp with a high-quality sharpening stone. We offer a wide variety of sharpening stones, such as Arkansas stone, Diamond stone, Bench stone, Water stone and more. Whether you own a pocket knife, a hunting knife or a kitchen knife, a sharpening stone is essential for preventing your blade from becoming dull. Most of our sharpening stones are lightweight and portable, so you can use them at home or take them with you wherever you go.
Put the pointed, narrow end of the sharpener up against the open end of the gut hook. The narrow, pointed end of the sharpener should face in toward the thickness of the blade, away from the edge of the gut hook. Match the angle of the sharpener to the original edge angle. This will maintain the correct sharpening angle and prevent you from getting cut by the blade tip. Hold the same angle when sharpening each side of the gut hook.
Hold your knife at approximately 20° in relation to the honing rod. Your angle doesn't need to be exact, just approximate. Whatever angle you decide to choose, or unwittingly end up choosing, make sure to maintain the same angle throughout the honing process. Changing the angle used during the honing process won't smooth out the metal in the blade as much as using a consistent angle will.
Oilstones, like the Norton whetstone, can be made out of natural or synthetic material like Novaculite, Aluminium Oxide, or Silicon Carbide. As per the name, oilstones require the use of oil as you sharpen your knife's blade. This type of stone is slower at sharpening or honing a blade and it can be messy and you need to always have some oil on hand but it creates a nice sharp edge and a beautiful polish.
The dual-sided whetstone is made from durable silicon carbide and has 400 grit on one side to sharpen the dullest blades and 1000 grit on the other side to create a nice smooth finish once the blade has been sharpened. The stone also forms a nice slurry that helps polish the blade for a superb shine. The stone is meant to be used with water, not oil and for best results, simply soak stone for 5-10 minutes before use, and lubricate with additional water as needed when sharpening.
Once you’ve decided to start sharpening your kitchen knives with a sharpening stone, you’ll need to take the necessary steps to actually get going. These steps include finding and buying the best sharpening stone for use at home, learning the basic technique involved in doing the sharpening, and then practicing enough times to get it right. (For the sake of the knives, we don’t recommend using your best kitchen knives for practice!)