I had wanted a pair of sharpening stones for a while, so was enthused to get this last week. I watched a bunch of YouTube videos on how to use them and a deburring strop I also bought and wow, my kitchen and pocket knives are now wicked sharp. Pro tip: if you post anything about it on social media, family and friends will almost surely volunteer their knives for more practice...
Diamond plates are available in various plate sizes (from credit card to bench plate size) and grades of grit. A coarser grit is used to remove larger amounts of metal more rapidly, such as when forming an edge or restoring a damaged edge. A finer grit is used to remove the scratches of larger grits and to refine an edge. There are two-sided plates with each side coated with a different grit.
A: We’re all told that a sharp knife is safer than a dull knife yet most everyone knows that merely touching a sharp knife can often result in a painful cut while we can wrap our hand around a dull blade with little worry. So why would anyone in their right mind claim that a sharp one is safer than a dull one? To a certain extent it’s a matter of semantics for sure, because there is no denying you have to be extremely careful around really sharp knives. But at the same time there is a very good reason to consider a dull knife to be more of a safety hazard than a sharp knife.
The 8,000 grit Kitayama is definitely a popular 8K stone, it is my favourite, and the feedback has much to do with that. It is silky smooth and feels creamy when you use it. When reaching refinement levels of 6k and above, polished bevels/edge are inevitable, and often sought after. The level of polish from this particular stone is very beautiful, assuming that you have done some refinement prior to this but it is a wonderful 8,000 grit stone.
The most important aspect of a sharpening stone is the grit. If you have knives that have taken a beating and are either nicked up or really dull, you’ll need a courser stone to get it back into shape. And in order to put an exceptionally sharp edge on an already sharp knife, you’ll need a finer grit stone. If your knives are already in pretty good shape and just need a touch up, buying just a finer grit stone might be enough, but don’t think you can get away without a courser stone for knives that need more TLC. It is possible to buy a combination, or two-sided sharpening stone.
I do have to question the grit ratings of these stones. I didn't notice anything before using them, but after a day, the 2000 grit actually felt courser than the 1000 grit side of the other stone. Whether that could be a byproduct of other factors or an indication of the more obvious, being that the grit ratings aren't accurate, I don't know. But that seemed to be the main criticism of cheaper whetstones, that their grit ratings often aren't accurate. Or maybe it's less a problem with accuracy and more a difference that most synthetic stones might have in common when being compared to much pricier natural stones?
This coarse grit whetstone is great for prepping old and dull knives that need to be sharpened with a fine grit stone. One of my good knives edge looked like someone had tried to chop barbed wire. After ten minutes on each side of the stone, the edge was smooth and free of imperfections. After it hit the knife with the fine grit stone, I was cutting onions and apples like hot butter! I would soak this stone for 12-24 hours before using. It sucks water like a sponge. The surface needs to be damp when you sharpen.
A: Another issue that comes up with electric knife sharpeners is how to clean them. Or if, in fact, they actually need cleaning at all. The answer to the second question is that yes, they do need to be cleaned occasionally. And by occasionally we mean once a year or so if you use them with any frequency. Obviously if you’ve only used the sharpener a few times then there’s no compelling reason to clean it, other than just wanting to keep things tidy (and there’s nothing wrong with that). So, having established that sharpeners do need to be cleaned occasionally you need to know how to do so in a safe and effective manner. It’s not complicated.
The Juuma sharpening and honing stones offer a simplified working principle while at the same time ensuring the highest possible quality in the offered grits. Juuma Cobalt Blue stones are made of an aluminium oxide and a bonding agent. Adding cobalt serves to slow stone abrasion and increase the speed of sharpening. The speed bonus is especially marked when stoning blue steel (blue paper steel that is often used for Japanese planes and chisels). The cobalt gives the stones their blue colour. Juuma is our proprietary brand. Juuma sharpening stones are produced by a renowned Japanese whetstone manufacturer.
The type of stone refers to the material it is made with. You can find many different types, including diamond, ceramic, natural stone, and synthetic. I would only suggest diamond if you’re planning to be sharpening only ceramic knives. Many of the stones you’ll find on Amazon or other retails are made of Corundum, which is a crystalline form of aluminium oxide. It’s a fine choice for a beginner sharpening stone.
There will be a drawer that extends into the mechanism under the abrasives. Any detritus from the sharpening process drops into this drawer. Exactly where the drawer is located will differ from sharpener to sharpener but it shouldn’t be hard to find. Remove the drawer flick any material into the wastebasket and then wipe out the drawer with a damp cloth or tissue. You may want to use work gloves and goggles to protect your hands and eyes from any loose metal shavings. Once the drawer is clean and dry replace it. The exact means by which the sharpening mechanism itself is cleaned will vary from manufacturer to manufacturer. Consult your owners guide for specific details. Make sure you don’t introduce any grease or other lubricants into the sharpener unless specifically directed to do so by the owner’s manual. Also, the outside of the sharpener should come perfectly clean with just a damp cloth. Avoid using commercial cleaners or abrasives of any kind.
One of the combinations of stones that I was introduced to several years ago is a unique one, it is a 500, 2,000 and 16,000 grit combination. I was apprehensive when I first tried this, that was thousands of knives ago, it works, it is fantastic combination. It is unique because the traditional way of thinking is that we should be doubling the grit sizes as we sharpen, for example, a 500 grit stone should be followed by a 1,000 grit, then 2,000 grit. This line of thought is meant to be flexible, it is a general rule only, I have broken it countless times.
J. Kenji López-Alt is the Chief Culinary Advisor of Serious Eats, and author of the James Beard Award-nominated column The Food Lab, where he unravels the science of home cooking. A restaurant-trained chef and former Editor at Cook's Illustrated magazine, his first book, The Food Lab: Better Home Cooking Through Science is a New York Times Best-Seller, the recipient of a James Beard Award, and was named Cookbook of the Year in 2015 by the International Association of Culinary Professionals.
A: People often make the mistake of assuming that just because a mechanical knife sharpener will sharpen the edge of a knife that means it will sharpen any type of cutting edge, including scissors. This is a mistake and can wind up being a costly mistake when you have to replace both your scissors and the knife sharpener. There are sharpening devices specifically designed to handle scissors. Or you can bring your scissors to a sharpening pro who will usually have the right equipment on hand to also sharpen scissors. Another thing to keep in mind about trying to use a sharpener to sharpen scissors is that by using the device in this fashion you are likely voiding the warranty. As such if you damage the device trying to sharpen scissors you’ll need to pay to have it repaired or replaced as the warranty won’t cover it. Also, certain types of high end scissors also come with a warranty. And, just as with the sharpener itself, if you try to sharpen them using a mechanical sharpener you can say goodbye to the warranty protection. The bottom line is to always use the appropriate tool for the job at hand. That way you’re assured of the best possible result and any warranty remains in effect.