2. Although I’ve been sharpening knives for a while, I never could get a knife sharp using the freehand method, I’ve had to rely on various jigs to set & maintain a constant angle to the bevel. To begin with, the Lanksy knife sharpener kit was my main tool, but then I found a South African jig made by Warthog Knife Sharpeners. I still have their first model, which, if memory serves me, came out in the late 1990’s. This has since been upgraded & is supplied with a diamond stone, which is worthless unless it’s going to be used for ceramic knives. However-the Warthog & the Warthog Multi-Blade’s modus operandi has the knife moving ABOVE the stone, unlike the Lanksy / Edge Pro / Edge Pro Chinese copies & variants. ( No oil / water dripping off the stone from above the knife). Also, the Warthogs use any bench-size whetstone available to its owner, a very big plus if you want to use your grand-dad’s old Arkansas stone.No tie in having to buy the manufacturer’s specialised stones which work only with one type of sharpening jig.
I've been using this stone for months and have started to find that, while the fine side does provide a nice sharp edge, the 400gr side is wearing my knives unevenly, which causes me to be unable to finely sharpen the entire length of the blade when moving to the fine side. The logo that is put in the middle of the 400gr side of the knife is causing more material to be removed than the rest of the blade when I'm sweeping across. I even verified this by going straight down the length of the fine side and watching the wear pattern come from the material coming off of the knife onto the stone.
A good whetstone and a little practice will keep all of your knives sharp and in perfect condition. The beauty is that it doesn’t take much effort to learn, just a good bit of practice to get the angle right and keep a consistent angle while you’re sharpening. Whetstones are available in department stores or online, and while they range in price based on the fineness of the grit, this thread at eGullet can help you pick a good grit to start with.
The humble sharpener tends to elicit more divergent opinions than just about any other type of kitchen tech. Everyone, it turns out, has their own take on which type of sharpener works best and why and most serious chefs aren’t shy about voicing their opinion. As you can imagine then there are a number of things most chefs – both professional and amateur – look for in a sharpener in order to ensure they get the one that’s right for them. These considerations include:
Serrated blades have a grind on one side of the blade. Only sharpen the grind side of the blade. Hold the sharpener at the angle that matches the original edge angle. Hold the knife with the edge away from you and the serrated side of the edge facing up. Set the tapered diamond sharpener in a serration so that you fill the indentation. Draw the sharpener towards the edge.
You've acquired a good chef's knife, you're using it almost daily to make tasty dinners for the family, and it's stored in a nice knife rack or a magnet for safekeeping. So why stop there? Keeping that knife's edge fine will make cooking not only safer but, let's face it, much more fun. Whether you've spent £150 on a high-end knife or under a tenner on a dinky paring knife, keeping it sharp is crucial.
I've always wanted to sharpen knives on water stones, and this set gave me the motivation to finally give it a shot. The price is amazing for the quality and content of the set. It comes with all the grits you need to sharpen anything... I usually start on the 400 grit if the knife is very dull, or directly on the 1000 grit if it's not too dull. The 3000 and 8000 grit stones are softer and ideal after the coarser stones. The online learning section is truly amazing, much better than I expected. A convenient place with instructional videos and many articles about knife sharpening. Only downside is that the knives are now so sharp I need to be very careful using them... but that's a good thing! I feel like I fell in love with knife sharpening again.
I'm a novice knife sharpener. I've had to unlearn what my grandpa taught me in order to use these. So far, I've had decent but mixed results. I've switched to my cheap 200/400-ish cheap tool stone from harbor freight for cutting a bevel when the blade has either been damaged or did not have a proper bevel. The 400/1000 grit stone in this kit is soft. Very soft. I have bowled it out several times. It makes keeping a steady angle difficult. But these stones at this price point are meant for learning, and for that they serve their purpose.
Over the course of two days I re-sharpened nearly a dozen old blades, including removing the secondary bevel on an old stainless Ontario saber-grind Navy diver's knife, convexing the edge on flat ground 1095 Schrade 55 that also came with a secondary bevel, and fixing a broken tip on an old Kershaw folder. These stones made quick work of the Schrade and Kershaw. Both had completely new edge geometry within 30 minutes apiece. The Kershaw looked like-new, as if the tip had never broken. And the Schrade cut much better than it's secondary bevel would previously allow, regardless of how sharp I got it with a ceramic rod and strops. The Ontario took a little more work, as it had been abused a little the last time I'd held it, over 25 years ago and was as dull as a case knife - one of the reasons I decided to go ahead and do a full saber grind - well, a slightly convexed saber, I suppose would be more accurate. But within under an hour of using the two stones and a couple leather strops (one with black compound, another with green), the Ontario was shaving sharp again too.
I had wanted a pair of sharpening stones for a while, so was enthused to get this last week. I watched a bunch of YouTube videos on how to use them and a deburring strop I also bought and wow, my kitchen and pocket knives are now wicked sharp. Pro tip: if you post anything about it on social media, family and friends will almost surely volunteer their knives for more practice...
Last, it should be noted that dual-sided Coticule/Belgian Blue whetstones are also sometimes available which have a layer of Belgian Blue stone on one side and a layer of Coticule on the other. Thus, these whetstones provide a softer, more coarse, grit on one side and a harder, finer, grit on the other. Plus, due to the inherent toughness of the Belgian Blue stone, these dual-sided stones do not require a substrate layer.
The Juuma sharpening and honing stones offer a simplified working principle while at the same time ensuring the highest possible quality in the offered grits. Juuma Cobalt Blue stones are made of an aluminium oxide and a bonding agent. Adding cobalt serves to slow stone abrasion and increase the speed of sharpening. The speed bonus is especially marked when stoning blue steel (blue paper steel that is often used for Japanese planes and chisels). The cobalt gives the stones their blue colour. Juuma is our proprietary brand. Juuma sharpening stones are produced by a renowned Japanese whetstone manufacturer.
We’ve shown you how to keep knives sharp before, and even discussed why water stones are best, but this crash course is quick, fast, and gets to the point. In most cases the most the average person at home can do is either hone their blade with a honing steel, which straightens and lines up the blade’s edge, but it doesn’t sharpen it. Alternatively you could run it through a handheld or electronic sharpener, but depending on the model you use it can do more harm than good.