The final Chef’s Choice sharpener on our list is the 316 Diamond Sharpener. Like the 15XV the 316 is at its best when used to sharpen Asian-style knives and it does so with unflinching effectiveness and speed. This is a compact, 2-stage electric sharpener that produces the 15 degree edge so favored in Asian cutlery. Ideal for the preparation of sashimi or sushi.
High Grit Stones: These are also known as finishing stones with the number range going up to 8000, and give you a super refined edge. They work great with Western knives as they cutting edge resembles a “U” as opposed to a “V”. If you are using your knife to cut meat, then you can happily stop at 4000 or 6000 grit. If you are only using it for vegetables or fruit go all the way to the 8000.
The stones from Shapton are probably the hardest of all Japanese sharpening stones. They will remain flat for a long time. They are therefore the best choice if you are looking for a relatively coarse stone that cuts quickly without having to be dressed repeatedly. The finer-grained stones also work very well. But Shapton stones do not provide the mirror finish you can achieve with softer stones.
Cerax and Suehiro stones from Suehiro are a little harder, and as such do not wear down as quickly as the classic Japanese water stones. The 8000 grit stone will perhaps give you the best cutting edge with a mirror polish on chisels and similar blades. Suehiro also makes a small combination stone for those who do not sharpen tools all that often and are reluctant to spend extra for a Cerax stone.
A shinkansen is a Japanese-style pull-through sharpener named after the famous bullet train. It features two sets of ceramic wheels set at the right angle for sharpening a Japanese blade, which takes out the guesswork of the waterstone. Simply hold the handle with your left hand, then saw back and forth gently through the coarser wheel to sharpen, before switching to the finer wheel to polish.
The goal when sharpening is to create a burr, which is a tiny whisper of metal left on one side of the blade. You'll know you have a burr when you can feel one smooth and one scratchy side to the edge. Warner's is formed in no time at all; I struggled. Nevertheless, eventually I got there. Once you've got the burr, it's time to move on to step three.
Now you may wonder, if a finer stone produces a better cutting edge why do I need a coarse stone at all? The answer is that finer stones work much more slowly than coarse ones. The amount of metal a fine stone removes with each pass is much less than what a coarse stone removes. If you have an edge with a good shape to it from a coarse stone, this is not a problem because the fine stone doesn’t have to remove much metal to improve the edge. If the edge is dull, it will take many times longer to reshape it with a fine stone than it would with a coarse one.
One of the most well-regarded natural whetstones is the yellow-gray "Belgian Coticule", which has been legendary for the edge it can give to blades since Roman times, and has been quarried for centuries from the Ardennes. The slightly coarser and more plentiful "Belgian Blue" whetstone is found naturally with the yellow coticule in adjacent strata; hence two-sided whetstones are available, with a naturally occurring seam between the yellow and blue layers. These are highly prized for their natural elegance and beauty, and for providing both a fast-cutting surface for establishing a bevel and a finer surface for refining it. This stone is considered one of the finest for sharpening straight razors.
Once sufficiently wet, it's time to position the stone on something solid, so it doesn't move about during sharpening. Many come with holders, but you can just place it on a slightly damp tea towel on the table. The stone should be roughly perpendicular to your body, though Warner told me it is sometimes easier to angle it ever so slightly to the right (if you're right handed).
DMT® is recognized as the worldwide leader in diamond knife sharpeners and sharpening products, with a diverse product line and reputation for quality and innovation. DMT’s patented and award-winning products are known for their superior quality and versatility, are easy to use, and allow for sharpening in a fraction of the time required by other methods. DMT manufactures a full line of diamond knife sharpeners and other sharpening tools for use in woodworking, culinary arts, gardening, camping, fishing, hunting, outdoor and winter sports, industrial applications and more.
Meanwhile, if you want something that you can use to sharpen a variety of knives and edges, including small and pointed tools, you might want to consider the DMT WM8CX-WB 8-Inch Duo Sharp Plus Bench Stone – Coarse/Extra Coarse with Base. For less than a hundred bucks, you can even use it to repair a damaged edge because of its extra-coarse diamonds.
Whetstone has two different sides of grain for sharpening and polishing knife edges. These softer Japanese stones have several advantages over harder stones. Because they are softer, they do not become glazed or loaded with detritus. Plus, they are lubricated effectively with water rather than oil, but can be used with either. Submerge the stone in water for about 5 - 10 minutes. Continue to apply water while sharpening with the Whetstone Cutlery Two sided Whetstone Sharpening Stone. The stone releases small particles during the sharpening process; this powder in combination with water allows the sharpening. After a while you will notice a small burr at the edge. Now repeat the same process on the other side of the blade. Finally, turn the stone over and repeat the procedure, this time using the finer grit of the stone. In order to remove the remaining burr, pull the blade at an angle over the stone. Rinse the stone and clean off the grinding residue. Clean your knife with hot water.
You might not need to spend hundreds of pounds to get the best knife sharpener, but you do need to know what you're doing. Warner gave me a crash course in the technique. As a newbie to this method, it took a while to get used to (especially since Warner handed me a knife that had never previously been sharpened) but after half an hour's practice and a little encouragement, I got the hang of it. Here's what I learned...
Steeling helps maintain sharpness. This process realigns the edge, correcting for dulling causes such as a rolled edge. A sharpening steel is a type of hardened cylindrical rod used similarly to honing stones. For example, a butcher steel is a round file with the teeth running the long way, while a packer steel (used in the meat packer's industry) is a smooth, polished steel rod designed for straightening the turned edge of a knife, and is also useful for burnishing a newly finished edge. Because steels have a small diameter they exert high local pressure, and therefore affect the knife metal when used with very little force. They are intended for mild steel knives that are steeled several times a day, but are not well suited for today's tougher and harder blade steels. Diamond steels are now available that have an industrial diamond coating and can remove blade metal as well as straighten, therefore used correctly they can re-profile a knife instead of just honing.