You will be given access to our useful online learning material: a set of videos and articles to help you improve your sharpening technique. These resources were made by professional knife sharpeners, specifically for beginners and intermediate sharpeners. The articles and videos will guide you and teach you knife sharpening from scratch, also covering more advanced techniques. You can also get in touch with us anytime if you have any questions concerning sharpening specific types knives.

The angle on a Buck Knife is set based upon how we feel the knife will be used. Heavy use needs a strong and blunt "V" while skinning or filleting would need a deeper but more vulnerable "V". We tend to grind to 13-16 degrees per side (see illustrations). If you match the existing edge angle and hold the knife against the stone to cut evenly across the edge grind, you will produce an edge with a similar angle.

Hobby microscope view of a 220 grit diamond sharpening stone. Tiny diamonds are electroplated to a perforated metal carrier strip and bonded to a plastic backing. The feature identified with the red line across it measures about 0.08 mm across. The dark area at upper right is a void designed to allow for swarf created during sharpening to be cleared from the diamonds. This relatively coarse stone would be used to reshape a damaged blade edge which would be refined by finer grit stones.
Oil stones have been around a long time, and while not as popular as in the past, they are still a practical option. Not as fast as the other stones, they are easy to use and their lower price makes them a good value for the budget conscious. With oil stones, the relation of the types and grits can be confusing. Our article, Difference in Sharpening Stone Materials, provides a more in depth explanation, but in general an India stone or two combined with an Arkansas stone is a good combination to start with.
Lubricate the stone. Some stones specifically use oil or water, and if that's the case, ensure you're using the recommended lubricant. Most importantly, whichever lubricant you choose, do not change it after the first use. When using oils, only use those approved for sharpening stones. Food oils such as vegetable and olive oil should never be applied! Some options like diamond stones, and others, don't need any lubricant at all, so be sure to check the stone's instructions.
A: Another issue that comes up with electric knife sharpeners is how to clean them. Or if, in fact, they actually need cleaning at all. The answer to the second question is that yes, they do need to be cleaned occasionally. And by occasionally we mean once a year or so if you use them with any frequency. Obviously if you’ve only used the sharpener a few times then there’s no compelling reason to clean it, other than just wanting to keep things tidy (and there’s nothing wrong with that). So, having established that sharpeners do need to be cleaned occasionally you need to know how to do so in a safe and effective manner. It’s not complicated.
So you are going to start at the heel and you are going to time it so that it goes all the way across. You go from one side to the other. You also want to make sure that your stone, I am not going to use as much pressure as I normally would because I cannot mount it on this showcase, you want to alternate from side to side to keep your bevel centered. Some people will take and do three times on one side and then three times on the other, the problem is that your backhand is never as good as your forehand and you end up cheating and you are going to end up with a blade that is offset. That is going to take it and thin down, you are going to get a thin bevel right on the edge. Once you get that V established, you can go from the coarser side to the finer side.
Before you start sharpening, soak the stone in water for around five to 10 minutes, until it absorbs the water and a liquid film appears on the surface. After soaking, splash some water on top, and re-splash during the process if it ever gets too dry. You'll get a dark, splotch of steel and stone building up on the stone while you're sharpening the blade. This is totally normal so just splash the stone with some water to clean it off and allow it to perform more efficiently. 
If you’re sharpening high quality knives, you probably don’t want to use a cheapo sharpening stone. But if you’re just getting started with sharpening your pocket knife, there’s no need to get too fancy right off the bat. You can find a sharpening stone at most hardware stores for about $10. This one is very similar to the one I use. Nothing fancy. Most basic sharpening stones come with two sides: a rough grit and a fine grit. The finer the grit, the finer or sharper you can get your blade. You usually start off sharpening on the rough grit and then finish sharpening it on the finer grit.
The sharpener has come a long way in the past couple of thousand years and yet it hasn’t. That is, while there have been incredible advances in the development of mechanical knife sharpeners the classic and very ancient sharpening stone is still with us and very much in use as you read this. The best knife sharpener for you will be one that meets the needs of your cuisine and your temperament but which, first and foremost, reliably produces the sharp knives (look after your knife!) you need with the least hassle.
It is sometimes too confusing on understanding the right sharpener that right to our tools. Then using the chart above you can consider on what is the right stone. Green, red, yellow and blue line they consist of the most familiar and affordable models of sharpening stone to purchase. You can see the performance of each stone in the chart. Silicon Carbide, Aluminum Oxide, and Arkansas they are typically used with the oil (Oil Stones). Waterstones (Synthetic Waterstones) are generally made of Aluminum Oxide too, then people also use oil in place of water with their Waterstone or use water on their Silicon Carbide sharpening stone in place of oil. In this group, Waterstones is the most preferred because of its easy for sharpening edges in shorter time.
A: That depends almost entirely on how often you use them. If you are a professional chef who uses his or her knives every day then you should hone them every time you use your knives. But honing has its limits and over time your edge is going to become dull no matter what. Therefore your knives will need to be sharpened at least several times a year. Some chefs, in fact, will use a whetstone on an almost daily basis in order to ensure their knives are always razor sharp. Most of us, however, are not professional chefs and may not even touch our kitchen knives for days at a time. In that case, it’s probably a good idea to hone the edge after every couple of uses and have your knives sharpened once a year.
This is a good quality stone for a beginner looking to learn about hand sharpening knives and blades. It holds up well, especially for the price point. New sharpeners are prone to gouging and scratching stones, pushing too hard, etc, and this stone handles the abuse nicely. The no slip base is very effective at cementing the stone in place, which is a critical safety feature.

Works well. Just got it today, sharpened two pocket knives, one a 8Cr13MoV Chinese steel, the other s30v American steel The stone made short work of both steels (which were pretty sharp already). But notably was able to make the s30v hair shaving sharp easily, something I've had trouble with. Inexpensive and useful, I love this stone. It's not the Ninja sharp 8000+ grits that you can find, but for pocket knives and EDC, it's perfect and inexpensive. Get One!!!!!!!!!!!!

In recent years, some whetstone manufacturers have started producing ceramic whetstones made from hard, ceramic, powders that are mixed with Aluminum Oxide and then sintered to form a solid. But, rather than using oil or water to lubricate the whetstone, ceramic whetstones are meant to be used without lubrication and thus, they provide a significant advantage for chefs who need to keep their knives sharp but, who do not have either the room or time for using a bench water stone. Thus, they are commonly available as either bench stones, pocket stones, round rods, or triangular rods.
So, as you can see, there are numerous different types and grades of whetstones on the market today and each has its advantages and disadvantages. Therefore, the right practice to choose the right sharpening stone for you is to choose a whetstone material based upon how fast you need to remove metal and how fine an edge you need. For instance, although they are often the most expensive type of whetstone, diamond hones generally cut the fastest even in their finer grits followed by Crystolon Stones and then India Stones which are then generally followed by Japanese Water Stones and then by Novaculite, Belgian Blue, and Coticule whetstones in terms of how fast they remove metal. However, it should also be noted that the rougher an edge is, the less sharp it is while, the more polished an edge is, the sharper it is and thus, rough edges are fine for some tools while other tools require a much finer edge and, hunting knives require the finest edge of all. Therefore, the trick to choosing the proper whetstone for any given sharpening purpose is to purchase multiple stones with varying grits to accomplish each given task from cutting an initial bevel or defining a damaged edge to refining an existing edge to polishing it. We hope this article helped you. Feel free to leave a comment below if you have questions.
Let’s start with Arkansas. If you have heard about Arkansas oilstone, it uses the Novaculite stone that mined in Arkansas. The most expensive of Arkansas stone is the Hard Translucent model that begins to rare in the market. If you want to shop for Arkansas, they are available in different grade starting from Soft Arkansas, Hard Arkansas, Hard Black Arkansas and Hard Translucent Arkansas. The finest grade of Arkansas can shape such of mirror polishing edges.