Some experts recommend sharpening as if trying to slice a thin layer or decal off the stone. Don't consider doing this without significant experience: it is typically bad advice; most people don't hold the correct angle this way. You instinctively raise the blade until you feel and see the edge working. This creates larger edge angles and thicker bevels as time goes on and the results gradually deteriorate. The more you sharpen, the duller it gets. Sound familiar?
The DuoSharp Plus stones are nicely sized at 8” long by 2 5/8” wide and have two grits on each stone to maximize value. The Plus in the name refers to an area of continuous grit in the otherwise interrupted grit surface of the stone. This area is for sharpening edges with fine points that might be difficult on the interrupted surface. A coarse/fine DuoSharp Plus stone is a good single stone to start a sharpening toolkit.
Water stones can also be made out of natural or synthetic materials and they are fast becoming the most popular type of whetstone as they only require the use of water to lubricate the stone. They are not as messy to work with as an oil stone and deliver fast sharpening results but for even better results, soak the stone in water for 5 or 10 minutes.
We tend to recommend natural Japanese water stones only to experienced users who are thoroughly familiar with the synthetic Japanese sharpening stones. Natural stones are not to everybody’s taste and there are inevitably many uncertainties with regard to their grit grade, which cannot be determined exactly, their hardness and their suitability for certain types of steel.
When starting out sharpening, it won’t be long before you hear about the “toothy” vs “polished” edge. It will suffice to know that a 1k stone is going to give you an edge that will perform beautifully as will a knife finished at 5k. There is a belief that a knife that has a highly polished finish, 5k and up will be so polished that it’s toothy goodness will be erased. This knife will not bite into the skin of a tomato for example because the edge is too polished, it will slide over the top. This is not always true, if the knife has been sharpened well, i.e. if Side A and Side B of the blade meet precisely at the Apex of the knife, that edge will slide into a tomato quite beautifully. I have seen many brand new Japanese knives with highly polished 8k edges that no tomato skin can stand up to.
Aesthetics – While it’s true that most people keep their sharpener, (even their expensive mechanical sharpeners) in the drawer until it’s time to use them you’ll still want to be aware of whether your sharpener fits into the overall aesthetic of your kitchen when you do take it out to use. While sharpener designs are fairly limited to be sure you typically have some control over the color and finish of the device as well as design factors like whether the device is boxy or rounded in appearance. With a stone sharpener or a stick however you pretty much get what you get.
A shinkansen is a Japanese-style pull-through sharpener named after the famous bullet train. It features two sets of ceramic wheels set at the right angle for sharpening a Japanese blade, which takes out the guesswork of the waterstone. Simply hold the handle with your left hand, then saw back and forth gently through the coarser wheel to sharpen, before switching to the finer wheel to polish.
I love this whetstone pendant!! I’ve been wearing it a couple weeks now and this thing not only performs like a champ but looks really cool. I originally left a 3 Star review like a jerk because I didn’t like the fact that my stone was all white. Idve rathered some markings but after wearing and using this thing the markings are something I could really care less about. This piece is super functional, extremely well crafted and looks great as an edc sharpening stone/necklace!! You guys rock!!
using an appropriate blade for the task – a thinner blade for more delicate work, and a thicker blade whenever a thinner blade is not required (e.g. a thinner blade might be used to cut fillets, butterfly steak or roast for stuffing, or perform Mukimono, while a thicker one might be used to slice or chop repeatedly, separate primal cuts of poultry or small game, or scrape and trim fat from meat or hide, as these actions would be more likely to cause unnecessary wear on a thinner blade.)
The angle on a Buck Knife is set based upon how we feel the knife will be used. Heavy use needs a strong and blunt "V" while skinning or filleting would need a deeper but more vulnerable "V". We tend to grind to 13-16 degrees per side (see illustrations). If you match the existing edge angle and hold the knife against the stone to cut evenly across the edge grind, you will produce an edge with a similar angle.
I can personally verify that this will get your knives very sharp. I will spare you all the gory details, but the picture is of the instructions the ER sent me home with after stopping the bleeding and patching me up. I have to say, that’s not what I had in mind regarding “Thanksgiving tips”. So: not only will knives slide easily through spinach, but they will go through finger and fingernail like a hot knife through butter after being sharpened by this whetstone. Very clean, straight cut. Impressive, really. Just take it slow and don’t be a moron like me.