Lubricate the stone. Some stones specifically use oil or water, and if that's the case, ensure you're using the recommended lubricant. Most importantly, whichever lubricant you choose, do not change it after the first use. When using oils, only use those approved for sharpening stones. Food oils such as vegetable and olive oil should never be applied! Some options like diamond stones, and others, don't need any lubricant at all, so be sure to check the stone's instructions.
You've acquired a good chef's knife, you're using it almost daily to make tasty dinners for the family, and it's stored in a nice knife rack or a magnet for safekeeping. So why stop there? Keeping that knife's edge fine will make cooking not only safer but, let's face it, much more fun. Whether you've spent £150 on a high-end knife or under a tenner on a dinky paring knife, keeping it sharp is crucial.
Oilstones, like the Norton whetstone, can be made out of natural or synthetic material like Novaculite, Aluminium Oxide, or Silicon Carbide. As per the name, oilstones require the use of oil as you sharpen your knife's blade. This type of stone is slower at sharpening or honing a blade and it can be messy and you need to always have some oil on hand but it creates a nice sharp edge and a beautiful polish.
You need the right size of sharpening stone that fit the type and size of your blades and tools. In general, 6-inches stones are the smaller models and 8-inches are the larger ones. The stones larger than 8 inches are work best for big-sized blades and tools. You may also find sort of ‘pocket knife sharpener’ out there. Most of the credit card sized sharpening stone are smaller than 6 inches and ideal for on the go sharpening not for regular basis.
Some recommended products may use affiliate links. ProHuntingKnife.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc or its affiliates.
The Sharpening and Specialty lines of waterstones from Naniwa are available in several packages of three to five stones. The Specialty line is the same as the Sharpening line, but half the thickness and therefore less expensive. Both the Sharpening and the Specialty stones are 8 1/4" long by 2 3/4" wide, amply sized for most knives and tools. These are a higher grade stone that do not require soaking before use. While you would need a flattening stone in addition, these kits are a good way to enter into premium grade waterstones.
I am just starting out sharpening with whet stones. I have found these stones to be very nice and the instructional videos that come along with the set on knifeplanet are extremely helpful to anyone starting out. The cost of the set was very reasonable and seems to be a great value. The customer service is amazing, I lost the site for the videos and sent an email to get the information and immediately there was a reply with all of the links that I needed. I appreciate their attention to their customers!!
The Chef’s Choice 476 2-Stage Sharpener transforms your weary kitchen, hunting and pocket knives into razor sharp cutting instruments with dependable ease. The sharpener is simple in concept, solid in its fabrication and reliable in the way it goes about its business. The design is also free of right-hand bias which is good news for the lefty chefs out there.
This set of two Norton combination waterstones provides four grits and also includes a flattening stone as an added value. The 220, 1000, 4000 and 8000 grit sides will handle everything from aggressive shaping to final polishing. They are 8" long by 3" wide, big enough to handle most knives and tools easily. Our most popular waterstone kit, this has everything you need to both sharpen with waterstones and maintain the stones themselves. A great starter set.
The following are my personal favourites and they are all synthetic stones, I do have experience with natural what stones but lets keep it simple, lets stick to synthetic water stones. Believe me, some of the world sharpest knives are sharpened solely on synthetic stones. Here are my personal favourites, I use these water stones every day and the order is not necessarily in priority, they are all good.
When a whetstone is used to cut metal, it acts like sandpaper by removing small particles of metal (aka “swarf”) with each pass of the blade over the stone. Therefore, whetstones with more coarse grits cut faster than those with finer grits and, at the same time, soft whetstones cut faster than hard whetstones because each pass of the blade over both types of whetstones not only removes fine particles of metal from the blade, it also removes fine particles from the surface of the whetstone (aka “slurry”) which continuously exposes new cutting crystals. However, if the swarf is allowed to build up on the surface of the whetstone during sharpening, it will clog the stone and drastically diminish its effectiveness. Therefore, some whetstones require water to lubricate the stone and suspend the swarf whereas, other whetstones require oil to lubricate the stone and suspend the swarf.
Historically, there are three broad grades of Japanese sharpening stones: the ara-to, or "rough stone", the naka-to or "middle/medium stone" and the shiage-to or "finishing stone". There is a fourth type of stone, the nagura, which is not used directly. Rather, it is used to form a cutting slurry on the shiage-to, which is often too hard to create the necessary slurry. Converting these names to absolute grit size is difficult as the classes are broad and natural stones have no inherent "grit number". As an indication, ara-to is probably (using a non-Japanese system of grading grit size) 500–1000 grit. The naka-to is probably 3000–5000 grit and the shiage-to is likely 7000–10000 grit. Current synthetic grit values range from extremely coarse, such as 120 grit, through extremely fine, such as 30,000 grit (less than half a micrometer abrasive particle size).
Low Grit Stones: A sharpening stone with grit number less than a 1000 is generally used for knives and tools that are damaged. If your blade has any nicks or chips in the blade, the stones will take care of them in a jiffy! They usually have a coarse side for nicks and chips, with the other side for general sharpening. Even if the knife’s edge has become totally blunt, the stone will re-sharpen it perfectly.
Siliciclastic stone is a clastic, noncarbonate, sedimentary stone that is almost exclusively silica-bearing and exists as either a form of quartz or, another silicate mineral. In addition, hardened clay is also a sedimentary stone but, it is formed from organic materials such as plant and animal matter and thus, it is much softer than Siliciclastic However, when silicon sediment is suspended in a clay matrix and then naturally hardened over thousands of years, it forms an excellent whetstone material; although, it is somewhat softer than Novaculite. Thus, because the geology of Japan once held large deposits of this type of stone it has been used for hundreds of years for sharpening tools, knives, and swords. However, unlike Novaculite, Belgian Blue, and Coticule, both natural and synthetic Japanese whetstones use water for lubrication and thus, they are commonly known as “Japanese Water Stones” because this type of stone is very porous. Thus, natural Japanese Water Stones must be soaked in water for up to twenty-four hours prior to use whereas, synthetic Japanese Water Stones can be soaked for only a few moments.