If your tool is badly worn out or have a very dull edge, then use the coarse side of the Lansky Puck first to remove the unevenness. Next, apply the fine side of it to give a smooth finish. If you only need to polish it a bit, then there is no need to use the coarse grit instead use the finer part. As it is very small in size, you can carry it with you everywhere you go.
Beginning on the right side of the knife, move from tip to heel and heel to tip, then flip the knife and repeat. For the left side, it’s opposite—start at the top of the stone to reach the heel area completely. So, you will move from heel to tip and then tip to heel. Remember to apply and release pressure as you did earlier, exactly the same as in Step 2, but with light, refining pressure.
A rule of thumb is to buy a stone at least as long as the blades you are sharpening. Smaller hand held stones make keeping a uniform angle more difficult. If you’re just beginning to learn the knife sharpening art you might consider finding a stone of each type I just listed. There is no such thing as the one perfect stone for every project. Depending on the job at hand you will need a different type for different tasks. Hope with our guide you will be able to find the best sharpening stone for knives.

This is one of the best sharpening stones available on the market. It boasts both medium and fine grit to ensure that you sharpen your kitchen knife to the required sharpness. And yes, it also boasts a superior wear-resistant construction which is made of aluminum oxide. Given it versatile construction, this sharpening stone can be used to sharpen all types of kitchen cutting tools including scissors and knives.
Beginning on the right side of the knife, move from tip to heel and heel to tip, then flip the knife and repeat. For the left side, it’s opposite—start at the top of the stone to reach the heel area completely. So, you will move from heel to tip and then tip to heel. Remember to apply and release pressure as you did earlier, exactly the same as in Step 2, but with light, refining pressure. 

This article is not about how to sharpen a knife, check this article instead, but briefly, a coarse stone is critical, it has the potential to raise a Burr quickly and make a dull knife sharp quickly. The correct use of pressure enables us to form a burr, remove the burr and then do some coarse stone refinement and thus create a very sharp knife. This sensation is motivation, it is a confidence builder and will enhance your sharpening experience, so believe me when I say that a coarse stone is your first priority. I recommend a 400, 600 or 800 grit. After that, depending on the knives you are sharpening strive to obtain stone combination, such as a 400 – 1,000 – 5,000 grit three stone combination is going to allow you to achieve knives sharper than most people have ever seen.
MULTIPLE USES: The stone can be used to sharpen all your kitchen knives as well as other tools around the house. Restore an edge to a pair of scissors or cutting shears for the garden. The 1000 grit is for establishing the proper cutting edge angle. The 6000 grit will bring the edge to razor sharp. Hone it with newspaper over the stone and you will be amazed.
×