Time-honored Japanese whetstone techniques mean that we use a variety of grit sizes before we finish by hand with a modified version of an old fashioned Barber’s strop. Japanese whetstones are not only the preferred sharpening medium for fine Japanese knives, but are superior for all types of cutlery. All larger scale metal removal is done with water cooled Japanese and Swedish grinders that will not burn the temper or remove unnecessary amounts of metal. We adjust edge geometry and blade thinness when necessary to provide improved geometry.
High Grit Stones: These are also known as finishing stones with the number range going up to 8000, and give you a super refined edge. They work great with Western knives as they cutting edge resembles a “U” as opposed to a “V”. If you are using your knife to cut meat, then you can happily stop at 4000 or 6000 grit. If you are only using it for vegetables or fruit go all the way to the 8000.
You've acquired a good chef's knife, you're using it almost daily to make tasty dinners for the family, and it's stored in a nice knife rack or a magnet for safekeeping. So why stop there? Keeping that knife's edge fine will make cooking not only safer but, let's face it, much more fun. Whether you've spent £150 on a high-end knife or under a tenner on a dinky paring knife, keeping it sharp is crucial.
I really liked this whetstone! I had a Smith's pocket sharpener that could get my knife sharp enough for working around in the yard (I have an Opinel no.8). However, in doing a little research I found that the sharpener was only around 600 grit on the finest setting. So this BearMoo 1000/4000 grit looked like the perfect step up, and it turned out to be the perfect stone for me. The pictures are an accurate representation of what you get. The removable rubber base was helpful when switching from one side to the next, and it kept the stone from sliding around. The instructions say that the stone can work with either water or oil, but that water is preferred. It said to leave the stone soaking in water for five minutes, and the stone worked like a champ. I especially liked how the instructions gave you an approximate time of how long the stone takes to sharpen a knife -- it just helped give me an idea that it would take about 15-20 minutes on the 1000 grit side, and then another 10-15 minutes on the 4000 grit. Just turn on a TV show!
Oilstones, like the Norton whetstone, can be made out of natural or synthetic material like Novaculite, Aluminium Oxide, or Silicon Carbide. As per the name, oilstones require the use of oil as you sharpen your knife's blade. This type of stone is slower at sharpening or honing a blade and it can be messy and you need to always have some oil on hand but it creates a nice sharp edge and a beautiful polish.