Some experts recommend sharpening as if trying to slice a thin layer or decal off the stone. Don't consider doing this without significant experience: it is typically bad advice; most people don't hold the correct angle this way. You instinctively raise the blade until you feel and see the edge working. This creates larger edge angles and thicker bevels as time goes on and the results gradually deteriorate. The more you sharpen, the duller it gets. Sound familiar?
So, as you can see, there are numerous different types and grades of whetstones on the market today and each has its advantages and disadvantages. Therefore, the right practice to choose the right sharpening stone for you is to choose a whetstone material based upon how fast you need to remove metal and how fine an edge you need. For instance, although they are often the most expensive type of whetstone, diamond hones generally cut the fastest even in their finer grits followed by Crystolon Stones and then India Stones which are then generally followed by Japanese Water Stones and then by Novaculite, Belgian Blue, and Coticule whetstones in terms of how fast they remove metal. However, it should also be noted that the rougher an edge is, the less sharp it is while, the more polished an edge is, the sharper it is and thus, rough edges are fine for some tools while other tools require a much finer edge and, hunting knives require the finest edge of all. Therefore, the trick to choosing the proper whetstone for any given sharpening purpose is to purchase multiple stones with varying grits to accomplish each given task from cutting an initial bevel or defining a damaged edge to refining an existing edge to polishing it. We hope this article helped you. Feel free to leave a comment below if you have questions.
I've been using this stone for months and have started to find that, while the fine side does provide a nice sharp edge, the 400gr side is wearing my knives unevenly, which causes me to be unable to finely sharpen the entire length of the blade when moving to the fine side. The logo that is put in the middle of the 400gr side of the knife is causing more material to be removed than the rest of the blade when I'm sweeping across. I even verified this by going straight down the length of the fine side and watching the wear pattern come from the material coming off of the knife onto the stone.
The stone is of good quality. It can be used with water or oil - but not both at the same time of course :) ... What I really want to mention is that Hayneedle has amazing customer service - no joke! My stone was shipped from the mfg. not hayneedle whse and there was a chip on one corner. They said - we can't have that! ... So they took care of the whole matter with NO cost to me and they were very friendly as if I was doing them a favor!
The AccuSharp Sharpener is proof positive that you shouldn’t judge a book by its cover. While it looks like something used to attach buttons to shirts it’s actually one of the most cost effective, and we mean effective, means around for restoring a professional edge to your dull knives. It’s compact, screwed together rather than glued and its diamond coated tungsten carbide wheels create an edge that will last.
We’ve shown you how to keep knives sharp before, and even discussed why water stones are best, but this crash course is quick, fast, and gets to the point. In most cases the most the average person at home can do is either hone their blade with a honing steel, which straightens and lines up the blade’s edge, but it doesn’t sharpen it. Alternatively you could run it through a handheld or electronic sharpener, but depending on the model you use it can do more harm than good.