I've been using this stone for months and have started to find that, while the fine side does provide a nice sharp edge, the 400gr side is wearing my knives unevenly, which causes me to be unable to finely sharpen the entire length of the blade when moving to the fine side. The logo that is put in the middle of the 400gr side of the knife is causing more material to be removed than the rest of the blade when I'm sweeping across. I even verified this by going straight down the length of the fine side and watching the wear pattern come from the material coming off of the knife onto the stone.
Now you may wonder, if a finer stone produces a better cutting edge why do I need a coarse stone at all? The answer is that finer stones work much more slowly than coarse ones. The amount of metal a fine stone removes with each pass is much less than what a coarse stone removes. If you have an edge with a good shape to it from a coarse stone, this is not a problem because the fine stone doesn’t have to remove much metal to improve the edge. If the edge is dull, it will take many times longer to reshape it with a fine stone than it would with a coarse one.
We get asked regularly to recommend stones for the beginning sharpener. Everyone wants to get stones that will be of the most practical use. No one wants to waste money on something they will have to replace later. The goal is to get stones that can be used as a foundation for your future needs. But the number of options available can be bewildering to the inexperienced sharpener, leaving many wondering where to start.
Medium Grit Stones: The number range here is from 1000 to 3000, with the latter being the basic, go-to sharpening stone. If your knives have lost their edge and need a good sharpen, then this is the grit you should start with. Don’t use it too often or the knife wears down rapidly. If you like to sharpen regularly, then the 2000 and 3000 grit are the ideal choice as they are less coarse, but please remember they are designed for sharpening and not maintaining the edge.
The goal when sharpening is to create a burr, which is a tiny whisper of metal left on one side of the blade. You'll know you have a burr when you can feel one smooth and one scratchy side to the edge. Warner's is formed in no time at all; I struggled. Nevertheless, eventually I got there. Once you've got the burr, it's time to move on to step three.