The DuoSharp Plus stones are nicely sized at 8” long by 2 5/8” wide and have two grits on each stone to maximize value. The Plus in the name refers to an area of continuous grit in the otherwise interrupted grit surface of the stone. This area is for sharpening edges with fine points that might be difficult on the interrupted surface. A coarse/fine DuoSharp Plus stone is a good single stone to start a sharpening toolkit.
I'm a novice knife sharpener. I've had to unlearn what my grandpa taught me in order to use these. So far, I've had decent but mixed results. I've switched to my cheap 200/400-ish cheap tool stone from harbor freight for cutting a bevel when the blade has either been damaged or did not have a proper bevel. The 400/1000 grit stone in this kit is soft. Very soft. I have bowled it out several times. It makes keeping a steady angle difficult. But these stones at this price point are meant for learning, and for that they serve their purpose.

I like the fact that there are two different grits (can be seen as two colors). the black rubber feet stick to the kitchen granite top like glue. The 1000 does a pretty good job of getting a knife roughly there and the 4000 puts on a fine polish for razor a sharp edge. I would go the extra step of stropping the knife after the grinding operation for an extra sharp edge.
Believe it or not the company have put a bit of effort into refining the look of their product to make it more aesthetically appealing. Whether or not they’ve succeeded we’ll let you decide. Once you get accustomed to the Classic II however the results are undeniable and the whole thing will make perfect sense. Use it on your kitchen knives, hunting knives, utility knives and more and enjoy the same high quality finish every time.
The goal in sharpening a serration is to maintain the ramp of the serration right to the edge. You do not want to create an edge bevel. Therefore we once again recommend the trusty felt pen trick. Paint the serration to be sharpened and follow your process. Evaluate if you are removing all the black. It should not take more than 5-8 strokes to resharpen if your angle was correct. Rotate or spin the sharpener as you go for the most even, consistent sharpening.

I had wanted a pair of sharpening stones for a while, so was enthused to get this last week. I watched a bunch of YouTube videos on how to use them and a deburring strop I also bought and wow, my kitchen and pocket knives are now wicked sharp. Pro tip: if you post anything about it on social media, family and friends will almost surely volunteer their knives for more practice...
A: We’re all told that a sharp knife is safer than a dull knife yet most everyone knows that merely touching a sharp knife can often result in a painful cut while we can wrap our hand around a dull blade with little worry. So why would anyone in their right mind claim that a sharp one is safer than a dull one? To a certain extent it’s a matter of semantics for sure, because there is no denying you have to be extremely careful around really sharp knives. But at the same time there is a very good reason to consider a dull knife to be more of a safety hazard than a sharp knife.
Clauss DualDrive is the first non-chuckable sharpener for Clauss DualDrive is the first non-chuckable sharpener for both #2 and carpenter pencils. Just use with your current bit on the fly. Manual or power-driven design evenly sharpens. Integrated shaving reservoir with see-through window. Features high carbon steel blades and a lifetime warranty.  More + Product Details Close

The coarse stone will cut the metal off quicker but it is going to give you a rougher edge but that way the job gets done quicker, without the oil. It is not as messy. This is just a real simple set up. If you do wood work you can make a little wooden box and rout it out. In this particular case it is just a 2x4, stone traced out, finishing nails tapped down so they are deeper than the stone so when you drop the stone in, if you are at a workbench you can C-clamp it down in place or you can hold on to it.
Some of the videos I watched suggested soaking the stone for 12-15 minutes prior to use. One suggested using vegetable oil on the surface versus water/soaking (I used water and presoaking it for 15-minutes). So instead of a simple 'out-of-the-box-and-use' approach, it required a bit of research before sharpening a knife. Otherwise I would have given this product a 5-star rating. is all about how to make sushi, we pride ourselves on creating new exciting sushi roll recipes and then sharing them with the world. In our video tutorials we will teach you how to do all a basics of making sushi and create innovative sushi rolls, sashimi, nigiri sushi and possibly might create a new category of sushi , who knows. Subscribe to our YouTube channel to be notified of our weekly sushi videos:
Method 1: Use an Electric Sharpener. Quality electric sharpeners are an option, but I strongly discourage their use. First off, they remove a tremendous amount of material from your edge. Sharpen your knife a dozen times, and you've lost a good half-centimeter of width, throwing it off balance, and rendering any blade with a bolster (i.e. most high-end forged blades) useless. Secondly, even the best models provide only an adequate edge. If you don't mind replacing your knives every few years and are happy with the edge they give you, they'll do the trick. But a much better choice is to...
Oil stones have been around a long time, and while not as popular as in the past, they are still a practical option. Not as fast as the other stones, they are easy to use and their lower price makes them a good value for the budget conscious. With oil stones, the relation of the types and grits can be confusing. Our article, Difference in Sharpening Stone Materials, provides a more in depth explanation, but in general an India stone or two combined with an Arkansas stone is a good combination to start with.
I purchased this set together with the 400/1000 grit stone assuming that some of my knives were quite dull and would need work on a coarse grit stone. Premium Whetstone Sharpening Stone 2 Side Grit 400/1000 | Knife Sharpener Waterstone with NonSlip Rubber Base & Flattening Stone. This is my first wetstone. First off I tried to sharpen my Chicago Cutlery boning knife. This knife is nearly thirty years old, has been abused in may ways and was quite dull. It was very difficult for me to get a burr on this blade, which I attribute to poor technique. Next I moved on to my Henckels Professional S paring and chef's knives. The paring knife was moderately sharp and was modestly improved after working over all three grits of stone. It would cut paper but again it was difficult to develop a burr with this blade. Undaunted I switched to the chef's knife. This knife is twenty years old and has never been professionally re-sharpened. I have sharpened it twice with a Lanksey sharpening system which marred the finish but did put a good edge on the blade. Lansky Standard Coarse Sharpening System with Fine Hones. The chef's knife was moderately dull and had several pits visible on the cutting surface. I modified my technique for passing the knife over the stone and worked the chef's knife over the 400 grit stone aggressively and eventually I was able to get a burr to form from the tip of the knife all the way to the handle. From there it was a simple process of reforming the burr on the 1000 grit stone and then finishing on the 6000. After sharpening, the chef's knife easily and cleanly slices a tomato with very light pressure and is in my opinion very sharp. Not sushi knife sharp but more than enough for the chopping and slicing I expect of it. I'm looking forward to going back and working both the boning knife and the paring knife over again. Don't expect a good result from this product the first time you use it. Watch videos on using a wetstone, expect to spend at least twenty minutes per knife at first, and practice forming a burr. If you can form a burr, you will be able to successfully sharpen your knife.
When starting out sharpening, it won’t be long before you hear about the “toothy” vs “polished” edge. It will suffice to know that a 1k stone is going to give you an edge that will perform beautifully as will a knife finished at 5k. There is a belief that a knife that has a highly polished finish, 5k and up will be so polished that it’s toothy goodness will be erased. This knife will not bite into the skin of a tomato for example because the edge is too polished, it will slide over the top. This is not always true, if the knife has been sharpened well, i.e. if Side A and Side B of the blade meet precisely at the Apex of the knife, that edge will slide into a tomato quite beautifully. I have seen many brand new Japanese knives with highly polished 8k edges that no tomato skin can stand up to.
The humble sharpener tends to elicit more divergent opinions than just about any other type of kitchen tech. Everyone, it turns out, has their own take on which type of sharpener works best and why and most serious chefs aren’t shy about voicing their opinion. As you can imagine then there are a number of things most chefs – both professional and amateur – look for in a sharpener in order to ensure they get the one that’s right for them. These considerations include:
Historically, there are three broad grades of Japanese sharpening stones: the ara-to, or "rough stone", the naka-to or "middle/medium stone" and the shiage-to or "finishing stone". There is a fourth type of stone, the nagura, which is not used directly. Rather, it is used to form a cutting slurry on the shiage-to, which is often too hard to create the necessary slurry. Converting these names to absolute grit size is difficult as the classes are broad and natural stones have no inherent "grit number". As an indication, ara-to is probably (using a non-Japanese system of grading grit size) 500–1000 grit. The naka-to is probably 3000–5000 grit and the shiage-to is likely 7000–10000 grit. Current synthetic grit values range from extremely coarse, such as 120 grit, through extremely fine, such as 30,000 grit (less than half a micrometer abrasive particle size).[citation needed]
This is a good size stone and has the two different grits needed for knife sharpening. No instructions were included, but there are many websites with written and video instructions, so this is not an issue for most people. A fair amount of dust is generated during the sharpening process, so protect the work surface and wash the knife after sharpening is completed.
As you probably have guessed, knives are easier to sharpen on longer stones. The width of the stone is less important than the length when sharpening knives. The longer stone allows for longer sharpening strokes and contributes to faster sharpening. The longer strokes mean fewer strokes across your stone, making it easier to maintain a consistent sharpening angle. As a rule of thumb, a small knife can easily be sharpened on a large stone, but a large knife cannot easily be sharpened on a small stone.

The stick – With a stick sharpener hold the sharpener in front of you (facing away from you) with one hand and the handle in the other hand. Hold the base of the knife against the base of the tip at a slight angle and then push the blade along the stick pulling it across the stick at the same time. The tip of the blade should cross the end of the stick. To sharpen the other side of the blade place it under the stick and repeat the process making sure to reverse the angle at which you are holding the knife against the stick.
3. Place the knife blade flat on the stone and raise it to a 10 to 15 degree angle. The key to knife sharpening is maintaining a constant angle. Different knives require different sharpening angles. For a pocket knife, shoot for a 10 to 15 degree angle. This will give you an edge that’s sharp enough for most daily needs, but not sharp enough to perform heart surgery.  Keeping a constant angle by hand takes a lot of practice. If you’re having difficulty, you might consider investing in a sharpening guide. It takes all the guess work out of maintaining the needed angle. They cost about $10.
I give Sharp Pebble a top rating for two reasons. First, the company emailed a user guide for me to review and learn how to best use its product while it was being shipped to me. Wonderfully proactive. Second, the sharpening stone did a terrific job restoring the edge on my kitchen knives that had been woefully neglected. Ever rent a house and every knife in the kitchen has the edge of a butter knife? I was almost there. Now, the knives are cutting beautifully. I have only one suggestion for Sharp Pebble. While the stone includes a useful angle guide that can be attached to a blade and the guide gives clear steps on prepping the stone and how to hold the blade when sharpening, it does not illustrate the manner in which the blade needs to be moved across the stone. I had to go to Youtube to get some tips on the exact method. I have historically been very bad at putting an edge on a blade due to ignorance primarily. But with the help of the video and a good stone, I did an effective job. The base does a great job of holding the stone in place and is attractive in the kitchen.
The Chef’s Choice 476 2-Stage Sharpener transforms your weary kitchen, hunting and pocket knives into razor sharp cutting instruments with dependable ease. The sharpener is simple in concept, solid in its fabrication and reliable in the way it goes about its business. The design is also free of right-hand bias which is good news for the lefty chefs out there.
Vielsalm Coticule on the other hand generally occurs in much more narrow layers sandwiched between the slate layer and the Belgian Blue layer and thus, it is both less plentiful and more expensive than Belgian Blue stone. Also, Coticule is divided into different grades and sometimes displays blemishes on the surface due to its proximity to the slate layer. Furthermore, it is somewhat harder than Belgium Blue stone and, due to its brittleness, it is bonded to a substrate layer of hard slate prior to sale to prevent the stone from breaking during use.
To summarize, Shapton Glass 500, 1,000 and 2,000 is a good combination and if you would like to throw in the 4,000 grit stone in lieu of the 2,000 that is good as well. If your knives are very hard, ZDP 189 for example, this is a fantastic choice. (They are also excellent for tools, chisels etc. and they are the premier choice for many Straight Razor honers).
We’ve shown you how to keep knives sharp before, and even discussed why water stones are best, but this crash course is quick, fast, and gets to the point. In most cases the most the average person at home can do is either hone their blade with a honing steel, which straightens and lines up the blade’s edge, but it doesn’t sharpen it. Alternatively you could run it through a handheld or electronic sharpener, but depending on the model you use it can do more harm than good.