I had wanted a pair of sharpening stones for a while, so was enthused to get this last week. I watched a bunch of YouTube videos on how to use them and a deburring strop I also bought and wow, my kitchen and pocket knives are now wicked sharp. Pro tip: if you post anything about it on social media, family and friends will almost surely volunteer their knives for more practice...

The stick – With a stick sharpener hold the sharpener in front of you (facing away from you) with one hand and the handle in the other hand. Hold the base of the knife against the base of the tip at a slight angle and then push the blade along the stick pulling it across the stick at the same time. The tip of the blade should cross the end of the stick. To sharpen the other side of the blade place it under the stick and repeat the process making sure to reverse the angle at which you are holding the knife against the stick.

"Sharpening is like a hangover cure," says Laurie Timpson, founder of Savernake Knives in Wiltshire. "If there was a cure and you knew about it, I'd stay at your house, crash on your sofa and have whatever it was when I woke up. Everyone would have it and there'd be no discussion. Everybody says they've created a perfect sharpening technique, and they haven't." 
Functionality – If you have experience with the stick or sharpening stone you likely don’t want or need anything else. If, however, you are in search of an electric-powered sharpener you’ll want to consider how many “stages” you need in your sharpener. In a typical 3-stage sharpener the first stage is the coarsest and does most of the heavy lifting required to turn the edge from dull to sharp. The second stage will have finer grain sharpening wheels. These are used to hone the edge, that is, to smooth out the burrs left by the coarse first stage. A third stage will refine the edge even further and remove any debris left over from the sharpening process.
Low Grit Stones: A sharpening stone with grit number less than a 1000 is generally used for knives and tools that are damaged. If your blade has any nicks or chips in the blade, the stones will take care of them in a jiffy! They usually have a coarse side for nicks and chips, with the other side for general sharpening. Even if the knife’s edge has become totally blunt, the stone will re-sharpen it perfectly.
The goal when sharpening is to create a burr, which is a tiny whisper of metal left on one side of the blade. You'll know you have a burr when you can feel one smooth and one scratchy side to the edge. Warner's is formed in no time at all; I struggled. Nevertheless, eventually I got there. Once you've got the burr, it's time to move on to step three.
1. Diamond Stones. I’ve used two, many years ago, to sharpen steel knives & found that the diamond coating wore away. They did work well at first, but then I was sharpening on the backing material. This puzzled me, because diamond is harder than steel, but have only recently read that the diamond particles are torn off the backing material because they stick to the softer steel. Diamond stones are recommended for sharpening ceramic knives only. This info about diamond stones & steel knives I got from an Edge-Pro article.
Once you’ve decided to start sharpening your kitchen knives with a sharpening stone, you’ll need to take the necessary steps to actually get going. These steps include finding and buying the best sharpening stone for use at home, learning the basic technique involved in doing the sharpening, and then practicing enough times to get it right. (For the sake of the knives, we don’t recommend using your best kitchen knives for practice!)