Don't know. Not sure that I really care, as these stones definitely did the job that was asked of them, and did it with ease, even for a beginner whetstone user. I'll probably stick with them, at least until I get a lot more experience. Though, I do see a 10,000 or higher grit stone in my immediate future - more to play around with, than a feeling of genuine need.
Over the course of two days I re-sharpened nearly a dozen old blades, including removing the secondary bevel on an old stainless Ontario saber-grind Navy diver's knife, convexing the edge on flat ground 1095 Schrade 55 that also came with a secondary bevel, and fixing a broken tip on an old Kershaw folder. These stones made quick work of the Schrade and Kershaw. Both had completely new edge geometry within 30 minutes apiece. The Kershaw looked like-new, as if the tip had never broken. And the Schrade cut much better than it's secondary bevel would previously allow, regardless of how sharp I got it with a ceramic rod and strops. The Ontario took a little more work, as it had been abused a little the last time I'd held it, over 25 years ago and was as dull as a case knife - one of the reasons I decided to go ahead and do a full saber grind - well, a slightly convexed saber, I suppose would be more accurate. But within under an hour of using the two stones and a couple leather strops (one with black compound, another with green), the Ontario was shaving sharp again too.
Sharpal 102N 5-in-1 Knife and Hook Sharpener features Sharpal 102N 5-in-1 Knife and Hook Sharpener features pre-set crossed carbides for quick edge setting and ceramic stones for fine honing. Multi-groove sharpening stone is designed to sharpen fishhooks of various sizes. It comes with rubber over-molded body and feet for secure and comfortable grip. Moreover integrated compass built-in rust-proof ... More + Product Details Close
As opposed to water whetstones that require you to pre-soak the stone, the Norton oil stone is pre-filled with oil to save time and eliminate the need to pre-soak it prior to use and the lubricant stays on the surface during sharpening. The oil also prevents metal from bonding with the abrasive surface by flushing away dislodged abrasive and metal chips.
I bet those Vikings, relatives of mine no doubt, never had it so good. They never had surated blades to sharpen or needed to wear cool things around their necks to woo the women (they just grabbed them by the hair I guess). I love my stone. So useful and beautiful. I always have spit to wet it with, and I always have a way to sharpen my tool. Wazoo makes high quality products. I give them the highest rating I have. Dudes!
The sharpener has come a long way in the past couple of thousand years and yet it hasn’t. That is, while there have been incredible advances in the development of mechanical knife sharpeners the classic and very ancient sharpening stone is still with us and very much in use as you read this. The best knife sharpener for you will be one that meets the needs of your cuisine and your temperament but which, first and foremost, reliably produces the sharp knives (look after your knife!) you need with the least hassle.
Honing steels are another story altogether. Honing steels are those instruments that look light a saber (light or otherwise) which you use to gussy up the edge of the blade periodically before using it. These do wear out every few years or less, depending on how often you use them. If you are unsure whether your honing steel is worn out run your finger around it. If it feels smooth all the way around then it’s time for a replacement. Not to worry though, they’re really affordable. One thing you may want to keep in mind about honing steels is that they typically won’t do much to hone the edge of some super hard knives, such as Japanese Global brand knives.
The word “Novaculite” is derived from the Latin word “novacula”, which means “razor stone” and is essentially a metamorphic, recrystallized, variety of Chert composed mostly of microcrystalline quartz that is found in the found in the Ouachita Mountains of Arkansas and Oklahoma and in the Marathon Uplift of Deposited in the Devonian Period and the early Mississippian Subperiod some 410 to 325 million years ago and subjected to uplift and folding during the Ouachita orogeny of the Atokan Epoch (early Pennsylvanian Subperiod), Novaculite is a very tough stone that is resistant to erosion and thus, the various layers of Novaculite stand out as ridges in the Ouachita Mountains. Thus, due to both its availability and its composition, it has been mined since ancient times for use as arrowheads and spear heads as well as in more modern times for use as sharpening stones.
I recommend it as a lightweight alternative to larger stone for smaller knives. Leather necklace is comfortable and seems strong. I conditioned it for suppleness and swim with it on tightened as a choker. Stone is small, dog-tag size. I use it with water. Functional for small folder knives and multi-tools. Not useful for large fixed blades, since you can't make a long stroke. Small to grip. I use double-sided tape on one side to keep it in place on a flat rock. Not sure of grit, seems like around 1000. It took a while, but i got my old boy scout knife sharp.
The coarse stone will cut the metal off quicker but it is going to give you a rougher edge but that way the job gets done quicker, without the oil. It is not as messy. This is just a real simple set up. If you do wood work you can make a little wooden box and rout it out. In this particular case it is just a 2x4, stone traced out, finishing nails tapped down so they are deeper than the stone so when you drop the stone in, if you are at a workbench you can C-clamp it down in place or you can hold on to it.
At age 10, Terada learned the basics of sushi from his father and then went on to attend RKC Chef's School in Kochi, Japan from 1987-1989. He soon earned a nickname for his fast knife, attention to detail, divine presentation and ability to create new dishes and accents based on traditional Japanese cuisine. After graduating RKC Chef School, he was called to serve under Master Chef Kondo at Yuzuan restaurant in Kochi, Japan from 1989-1992. Mr. Kondo is the master of Kansai style cooking, considered to be the high-end of Japanese cuisine. Terada earned the title Master Sushi Chef by becoming the standing head sushi chef & can serve Fugu (Japan Licensed) to the public.
Sharp knives make the culinary world go round but finding the best knife sharpener isn’t as simple as walking into the store (do people still walk into stores?) and grabbing the first sharpener that presents itself. There are different types of electric sharpeners, some that are straightforward and some whose sharpening process involves as many as 3 or 4 stages. If you’re looking to keep things simple by using a sharpening stone well, there are 3 different types of them as well – oil, water and diamond – and they each have their pros and cons. So it can be confusing.
I purchased this set together with the 400/1000 grit stone assuming that some of my knives were quite dull and would need work on a coarse grit stone. Premium Whetstone Sharpening Stone 2 Side Grit 400/1000 | Knife Sharpener Waterstone with NonSlip Rubber Base & Flattening Stone. This is my first wetstone. First off I tried to sharpen my Chicago Cutlery boning knife. This knife is nearly thirty years old, has been abused in may ways and was quite dull. It was very difficult for me to get a burr on this blade, which I attribute to poor technique. Next I moved on to my Henckels Professional S paring and chef's knives. The paring knife was moderately sharp and was modestly improved after working over all three grits of stone. It would cut paper but again it was difficult to develop a burr with this blade. Undaunted I switched to the chef's knife. This knife is twenty years old and has never been professionally re-sharpened. I have sharpened it twice with a Lanksey sharpening system which marred the finish but did put a good edge on the blade. Lansky Standard Coarse Sharpening System with Fine Hones. The chef's knife was moderately dull and had several pits visible on the cutting surface. I modified my technique for passing the knife over the stone and worked the chef's knife over the 400 grit stone aggressively and eventually I was able to get a burr to form from the tip of the knife all the way to the handle. From there it was a simple process of reforming the burr on the 1000 grit stone and then finishing on the 6000. After sharpening, the chef's knife easily and cleanly slices a tomato with very light pressure and is in my opinion very sharp. Not sushi knife sharp but more than enough for the chopping and slicing I expect of it. I'm looking forward to going back and working both the boning knife and the paring knife over again. Don't expect a good result from this product the first time you use it. Watch videos on using a wetstone, expect to spend at least twenty minutes per knife at first, and practice forming a burr. If you can form a burr, you will be able to successfully sharpen your knife.
When the stone is intended for use on a flat surface, it is called a Bench Stone. On the other hand, small, portable, hand-held stones are referred to as Pocket Stones. Also, because Pocket Stones are smaller than Bench Stones, they are more easily transported but, they also present difficulty in maintaining a consistent angle and even pressure when attempting to sharpen longer blades. Consequently, Bench Stones are commonly used at home or in camp whereas, Pocket Stones are generally reserved for honing an edge in the field.
Like all DMT® products, DMT sharpening stones are proudly made in the USA and will produce excellent, consistent results time after time, year after year. DMT's diamond sharpening stones feature the most diamond per square inch in the industry and a proprietary process that ensures near-perfect consistency in grit size, engineered to be the flattest sharpeners on the market. Simply put, DMT’s premium sharpening stones are best-in-class products with undeniable long-lasting value.
These are very popular stones. 8" Dia-Sharps have a single grit per stone making them more expensive, but at 8" by 3" they are wider than the 8" DuoSharps, offering a good working surface. The 8" Dia-Sharp line also has the widest range of grits available from DMT, with extra extra coarse, medium extra fine and extra extra fine options not available in other sizes, so it is good line to consider. One coarse and one fine stone is a good starting point.
Chefs will do this every day, and there's no reason you shouldn't too. Before cooking, or after you've done the washing up, honing your knife will help keep it in good condition. "When you're using a honing steel, you're not actually removing any metal at all, just re-straightening that edge, to get it back in line," says Authbert. Remember that you'll still need to sharpen it every two or three months.
DMT® is recognized as the worldwide leader in diamond knife sharpeners and sharpening products, with a diverse product line and reputation for quality and innovation. DMT’s patented and award-winning products are known for their superior quality and versatility, are easy to use, and allow for sharpening in a fraction of the time required by other methods. DMT manufactures a full line of diamond knife sharpeners and other sharpening tools for use in woodworking, culinary arts, gardening, camping, fishing, hunting, outdoor and winter sports, industrial applications and more.
I've always wanted to sharpen knives on water stones, and this set gave me the motivation to finally give it a shot. The price is amazing for the quality and content of the set. It comes with all the grits you need to sharpen anything... I usually start on the 400 grit if the knife is very dull, or directly on the 1000 grit if it's not too dull. The 3000 and 8000 grit stones are softer and ideal after the coarser stones. The online learning section is truly amazing, much better than I expected. A convenient place with instructional videos and many articles about knife sharpening. Only downside is that the knives are now so sharp I need to be very careful using them... but that's a good thing! I feel like I fell in love with knife sharpening again.
I love this whetstone pendant!! I’ve been wearing it a couple weeks now and this thing not only performs like a champ but looks really cool. I originally left a 3 Star review like a jerk because I didn’t like the fact that my stone was all white. Idve rathered some markings but after wearing and using this thing the markings are something I could really care less about. This piece is super functional, extremely well crafted and looks great as an edc sharpening stone/necklace!! You guys rock!!
In summary: Peter Nowlan is a professional knife sharpener based in Halifax (Canada) and he recommends the KnifePlanet Sharpening Stone Set, a beginners and intermediate kit that includes 4 sharpening grits: 400/1000, 3000/8000, a bamboo base and the KnifePlanet Flattening Stone. The Japanese Naniwa 3-stone combination is also a great (and more expensive) choice, ideal for professionals and more advanced sharpeners: the Naniwa stones are slightly bigger compared to KnifePlanet’s. In both cases, a coarse, medium and fine grit combination is very effective to sharpen and refine the edge:
High Grit Stones: These are also known as finishing stones with the number range going up to 8000, and give you a super refined edge. They work great with Western knives as they cutting edge resembles a “U” as opposed to a “V”. If you are using your knife to cut meat, then you can happily stop at 4000 or 6000 grit. If you are only using it for vegetables or fruit go all the way to the 8000.
When sharpening a knife, you're actually grinding away the existing blade to create a new edge. This is evidenced by the fact that upon completion, you can find tiny metal filings, called swarf, when wiping down the stone. Because the metal blade is actually being ground away, a high importance is placed on the technique and consistency of drawing a knife over the stone.
I would say they are worth the money. Go for it. I took a blunted Pampered Chef kitchen knife from completely dull to razor sharp in about an hour (of bumbling and repairing mistakes LOL) heavy grinding. If you have a severely damaged blade, grab one of those cheesey two sided stones from Harbor Freight to do your heavy grinding. From there these stones will work very well.
Once you’ve decided to start sharpening your kitchen knives with a sharpening stone, you’ll need to take the necessary steps to actually get going. These steps include finding and buying the best sharpening stone for use at home, learning the basic technique involved in doing the sharpening, and then practicing enough times to get it right. (For the sake of the knives, we don’t recommend using your best kitchen knives for practice!)
Beginning on the right side of the knife, move from tip to heel and heel to tip, then flip the knife and repeat. For the left side, it’s opposite—start at the top of the stone to reach the heel area completely. So, you will move from heel to tip and then tip to heel. Remember to apply and release pressure as you did earlier, exactly the same as in Step 2, but with light, refining pressure.
using an appropriate blade for the task – a thinner blade for more delicate work, and a thicker blade whenever a thinner blade is not required (e.g. a thinner blade might be used to cut fillets, butterfly steak or roast for stuffing, or perform Mukimono, while a thicker one might be used to slice or chop repeatedly, separate primal cuts of poultry or small game, or scrape and trim fat from meat or hide, as these actions would be more likely to cause unnecessary wear on a thinner blade.)
Now that you're holding the handle and the blade is in position, gently apply some pressure to the belly of the blade with your left hand fingers – "roughly the amount of pressure to semi depress a sponge," says Warner. Starting at the tip, glide the blade up and down the stone – around five strokes up and down is a good number. Then move to the middle – five more strokes. Finally five strokes up and down on the heel.
Dear Mr. Carmona: From the first time I spoke to you by telephone, I have been greatly impressed by your willingness, even your eagerness to take your time from your own personal activities to assist me. I am awed by your extensive knowledge and work in a field that is such a benefit to so many people in so many kind of activities. Your website is a real asset, and a testimony to your desire to be helpful. I wish to thank you again for your kindness as well as your fervor in the way your company deals with interested parties, even those who may purchase nothing, or only small items, as I have done.
Aluminum-Oxide oil stones are very popular man-made sharpening stones produced by an abrasives company called Norton and which are commonly called India Stones. Generally less expensive than Arkansas stones (aka Novaculite), these stones are graded coarse, medium, and fine and are designed for fast cutting. Yet, when the fine grit is used, they can also produce a relatively fine edge. Also, because India Oil Stones are both softer and coarser than Arkansas Stones, they are commonly used in conjunction with Novaculite to cut the initial edge bevels or, repair extremely dull or damaged edges before refining and polishing the bevel with an Arkansas Stone.
I am just starting out sharpening with whet stones. I have found these stones to be very nice and the instructional videos that come along with the set on knifeplanet are extremely helpful to anyone starting out. The cost of the set was very reasonable and seems to be a great value. The customer service is amazing, I lost the site for the videos and sent an email to get the information and immediately there was a reply with all of the links that I needed. I appreciate their attention to their customers!!
The type of stone refers to the material it is made with. You can find many different types, including diamond, ceramic, natural stone, and synthetic. I would only suggest diamond if you’re planning to be sharpening only ceramic knives. Many of the stones you’ll find on Amazon or other retails are made of Corundum, which is a crystalline form of aluminium oxide. It’s a fine choice for a beginner sharpening stone.
The kind of tech we love: compact, reliable, durable, attractive and cheap. Purists may feel that other sharpeners will produce a more perfect result but for 99% of the human race this sharpener will be everything the doctor ordered. Your blades stay sharp for a good long time thanks to the 2-stage sharpening process and if you’re a left handed chef you’ll love the fact that it works just as effectively for you as for anyone else.
This is a good size stone and has the two different grits needed for knife sharpening. No instructions were included, but there are many websites with written and video instructions, so this is not an issue for most people. A fair amount of dust is generated during the sharpening process, so protect the work surface and wash the knife after sharpening is completed.