The thumbnail test (not recommended for novices) - With this test you take your newly sharpened blade and run it oh-so-delicately over your thumbnail. If you feel it digging in even a tiny bit, it’s likely sharp enough. If on the other hand it just slips and slides across the surface of your nail it’s not sharp yet. Again, this test is only recommended for people with lots of experience handling knives and even then they’d probably be better off just grabbing a tomato or a piece of paper.
Like all DMT® products, DMT sharpening stones are proudly made in the USA and will produce excellent, consistent results time after time, year after year. DMT's diamond sharpening stones feature the most diamond per square inch in the industry and a proprietary process that ensures near-perfect consistency in grit size, engineered to be the flattest sharpeners on the market. Simply put, DMT’s premium sharpening stones are best-in-class products with undeniable long-lasting value.
About a year ago, we wrote an article on why every man should carry a pocket knife. A lot of you out there agreed that the pocket knife deserves a permanent place in every man’s pocket. After we wrote the post, we started getting emails from men who were first time pocket knife owners asking how to sharpen their new prized possession. Well today we’re going to answer that question.
The basic concept of sharpening is simple – you're using an abrasive edge to remove metal – but the knife you buy may alter the method you should use. A general rule of thumb is that a waterstone can be used for both Japanese- and Western-style blades, but you should avoid pull-through sharpeners for Japanese knives (or any knife with very brittle blades).
A: That depends almost entirely on how often you use them. If you are a professional chef who uses his or her knives every day then you should hone them every time you use your knives. But honing has its limits and over time your edge is going to become dull no matter what. Therefore your knives will need to be sharpened at least several times a year. Some chefs, in fact, will use a whetstone on an almost daily basis in order to ensure their knives are always razor sharp. Most of us, however, are not professional chefs and may not even touch our kitchen knives for days at a time. In that case, it’s probably a good idea to hone the edge after every couple of uses and have your knives sharpened once a year.
The sharpener has come a long way in the past couple of thousand years and yet it hasn’t. That is, while there have been incredible advances in the development of mechanical knife sharpeners the classic and very ancient sharpening stone is still with us and very much in use as you read this. The best knife sharpener for you will be one that meets the needs of your cuisine and your temperament but which, first and foremost, reliably produces the sharp knives (look after your knife!) you need with the least hassle.
Everten is Australia's leading online kitchenware retailer. A passionate Australian family business, we pride ourselves on having the best range available, stocking over 10000 products from the world's leading brands matched with the best service. As the very first online kitchenware retailer to become a Google Trusted Store in Australia, you know that you can trust us to deliver quality kitchenware at unbeatable prices with full product warranties to your door for just a flat rate of $8.90 anywhere in Australia. Read more about us
This is a good quality stone for a beginner looking to learn about hand sharpening knives and blades. It holds up well, especially for the price point. New sharpeners are prone to gouging and scratching stones, pushing too hard, etc, and this stone handles the abuse nicely. The no slip base is very effective at cementing the stone in place, which is a critical safety feature.
Method 1: Use an Electric Sharpener. Quality electric sharpeners are an option, but I strongly discourage their use. First off, they remove a tremendous amount of material from your edge. Sharpen your knife a dozen times, and you've lost a good half-centimeter of width, throwing it off balance, and rendering any blade with a bolster (i.e. most high-end forged blades) useless. Secondly, even the best models provide only an adequate edge. If you don't mind replacing your knives every few years and are happy with the edge they give you, they'll do the trick. But a much better choice is to...
So you are going to start at the heel and you are going to time it so that it goes all the way across. You go from one side to the other. You also want to make sure that your stone, I am not going to use as much pressure as I normally would because I cannot mount it on this showcase, you want to alternate from side to side to keep your bevel centered. Some people will take and do three times on one side and then three times on the other, the problem is that your backhand is never as good as your forehand and you end up cheating and you are going to end up with a blade that is offset. That is going to take it and thin down, you are going to get a thin bevel right on the edge. Once you get that V established, you can go from the coarser side to the finer side.
Although there are many ways to sharpen your kitchen knives, we believe that using a sharpening stone is the absolute best way to go about it. Not only will you get the best results, you won’t assume as much risk of damaging the blade as you would using a manual or electric knife sharpener. The problem for most home cooks, however, is finding the best sharpening stone and learning how to use it. I’m not going to pretend it’s as easy as purchasing a stone and digging right in.
Every finished product you serve to your customers goes through a number of steps from growing, harvesting, and shipping to receiving, prepping, and serving. In each one of these steps, potential food safety hazards that might sicken or injure the final consumer are present. However, with careful planning, these hazards can be prevented, reduced to safe levels, or even eliminated altogether. Keep reading to learn what a HACCP plan is and the steps needed to create your own. What does HACCP Stand For? HACCP stands for Hazard Analysis and Critical Control Points. It is a system restaurant operators put in place to help them identify and react to dangerous biological, chemical, or physical food contamination. The goal of this food management s
In addition, the most prized of the natural Japanese Water Stones are quarried in the Narutaki District north of Kyoto, Japan and are commonly available as either bench stones or pocket stones in grits ranging from 120 to 12,000. On the other hand, synthetic water stones are made from Aluminum Oxide and commonly available as either bench stones or pocket stones as well in grits ranging from 220 to 8,000 and, although this is the same abrasive material used to make India Oil Stones, the difference between the two is that the binder that holds the abrasive together enables Water Stones to be much softer than India Oil Stones which, in turn, promotes faster cutting because the worn abrasive material breaks away more quickly and is replaced with fresh, sharp, abrasive material more quickly. In addition, because water stones do not become glazed or loaded with swarf like oil stones can, new abrasive particles are constantly exposed as the stone wears so it continues to cut consistently. Plus, they can be lubricated effectively with water (rather than oil which can ruin some water stones) which combines with the fine particles of abrasive from the surface of the stone to form a slurry which polishes the bevel as the stone cuts. However, it should also be noted that Water Stones do become uneven significantly faster than other types of whetstones although, their softness does make them easier to true again.
This is a good quality stone for a beginner looking to learn about hand sharpening knives and blades. It holds up well, especially for the price point. New sharpeners are prone to gouging and scratching stones, pushing too hard, etc, and this stone handles the abuse nicely. The no slip base is very effective at cementing the stone in place, which is a critical safety feature.
TO USE: Soak stone in water for no more than 5-10 minutes. Place stone on a damp cloth with the courser 400 grit side (dark green) facing up. Hold the knife so that it’s flat and perpendicular to the block, with the blade facing left. Holding the knife at a 20-degree angle, slowly sweep the edge of the blade from left to right down the length of the stone and continue until sharp. If stone starts to feel too dry, add more water. Be patient and take your time. Flip knife over and repeat on the other side (now moving from right to left). Be sure to sharpen both sides evenly. To polish the blade further, flip stone over to the fine 1000 grit side (light green) and repeat the process. When blade is honed to desired sharpness, wash and dry your knife. To clean your stone, simply rinse with water, wipe away any remaining metal residue with a rag, rinse again, then dry.
When you sharpen a Buck Knife properly it will perform the way it was meant to. Never sharpen your knife on a power-driven grinding wheel not specifically designed for that purpose. You could burn the temper from your blade making the edge brittle and prone to chips or cracks. This also voids the warranty. The first step to knife sharpening is to pick a sharpener.

The Chef’s Choice 476 2-Stage Sharpener transforms your weary kitchen, hunting and pocket knives into razor sharp cutting instruments with dependable ease. The sharpener is simple in concept, solid in its fabrication and reliable in the way it goes about its business. The design is also free of right-hand bias which is good news for the lefty chefs out there.
The word “Novaculite” is derived from the Latin word “novacula”, which means “razor stone” and is essentially a metamorphic, recrystallized, variety of Chert composed mostly of microcrystalline quartz that is found in the found in the Ouachita Mountains of Arkansas and Oklahoma and in the Marathon Uplift of  Deposited in the Devonian Period and the early Mississippian Subperiod some 410 to 325 million years ago and subjected to uplift and folding during the Ouachita orogeny of the Atokan Epoch (early Pennsylvanian Subperiod), Novaculite is a very tough stone that is resistant to erosion and thus, the various layers of Novaculite stand out as ridges in the Ouachita Mountains. Thus, due to both its availability and its composition, it has been mined since ancient times for use as arrowheads and spear heads as well as in more modern times for use as sharpening stones.

This is my first time ordering from hayneedle, but you came thru with flying colors. I was so happy to see the delivery come so quick as stated. It was just as i hoped it would be, i now have my whetstone sharpening stone, to really get my kitchen knives as sharp as i can get them. This to me is the best way to sharpen a knife, it takes patience but the reward is worth it. Thanks Hayneedle you rock!!! Ray D.