For instance, American Novaculite (aka Washita and Arkansas Stones) is a form of metamorphic Chert that produces some of the best known and best loved natural whetstones in existence. Then, there is a form of Belgian Coticule which has been known for providing extra-keen edges since Roman times and, there is a Japanese Siliciclastic sedimentary stone (aka Japanese Water Stones) which consist of a fine silicate particles suspended in a clay matrix. Plus, there are also various types of man-made whetstones available such as Silicon Carbide (aka Crystalon) stones and Aluminum Oxide (aka India Stones) as well as a synthetic Corundum (aka Ruby) rod and Aluminum Oxide impregnated ceramic rods as well as several different types of diamond hones.
So you are going to start at the heel and you are going to time it so that it goes all the way across. You go from one side to the other. You also want to make sure that your stone, I am not going to use as much pressure as I normally would because I cannot mount it on this showcase, you want to alternate from side to side to keep your bevel centered. Some people will take and do three times on one side and then three times on the other, the problem is that your backhand is never as good as your forehand and you end up cheating and you are going to end up with a blade that is offset. That is going to take it and thin down, you are going to get a thin bevel right on the edge. Once you get that V established, you can go from the coarser side to the finer side.
The Juuma sharpening and honing stones offer a simplified working principle while at the same time ensuring the highest possible quality in the offered grits. Juuma Cobalt Blue stones are made of an aluminium oxide and a bonding agent. Adding cobalt serves to slow stone abrasion and increase the speed of sharpening. The speed bonus is especially marked when stoning blue steel (blue paper steel that is often used for Japanese planes and chisels). The cobalt gives the stones their blue colour. Juuma is our proprietary brand. Juuma sharpening stones are produced by a renowned Japanese whetstone manufacturer. 

Siliciclastic stone is a clastic, noncarbonate, sedimentary stone that is almost exclusively silica-bearing and exists as either a form of quartz or, another silicate mineral. In addition, hardened clay is also a sedimentary stone but, it is formed from organic materials such as plant and animal matter and thus, it is much softer than Siliciclastic However, when silicon sediment is suspended in a clay matrix and then naturally hardened over thousands of years, it forms an excellent whetstone material; although, it is somewhat softer than Novaculite. Thus, because the geology of Japan once held large deposits of this type of stone it has been used for hundreds of years for sharpening tools, knives, and swords. However, unlike Novaculite, Belgian Blue, and Coticule, both natural and synthetic Japanese whetstones use water for lubrication and thus, they are commonly known as “Japanese Water Stones” because this type of stone is very porous. Thus, natural Japanese Water Stones must be soaked in water for up to twenty-four hours prior to use whereas, synthetic Japanese Water Stones can be soaked for only a few moments.

Cost – While you can get a perfectly serviceable sharpening stick or stone sharpener for short money and some very high-quality tabletop manual 2 and 3-stage sharpeners for less than $50, high-quality mechanical systems will often run you $200 or even more. While that’s not so much money it’s likely to impact the quality of your life it is a lot to pay to keep a decent edge on your knives. While how much you ultimately pay for a sharpener is entirely up to you, you may want to consider your commitment to cooking and how often you are actually liable to use the device. If this is your first sharpener you might also want to consider learning how to sharpen a blade using a classic stick or stone sharpener first, before deciding if moving up to a mechanical sharpener is the right thing for you.
I like the fact that there are two different grits (can be seen as two colors). the black rubber feet stick to the kitchen granite top like glue. The 1000 does a pretty good job of getting a knife roughly there and the 4000 puts on a fine polish for razor a sharp edge. I would go the extra step of stropping the knife after the grinding operation for an extra sharp edge.
The most important aspect of a sharpening stone is the grit. If you have knives that have taken a beating and are either nicked up or really dull, you’ll need a courser stone to get it back into shape. And in order to put an exceptionally sharp edge on an already sharp knife, you’ll need a finer grit stone. If your knives are already in pretty good shape and just need a touch up, buying just a finer grit stone might be enough, but don’t think you can get away without a courser stone for knives that need more TLC. It is possible to buy a combination, or two-sided sharpening stone.
Heres why I wasn't impressed at first. I only used it for a few minutes on each side, which resulted in nothing. I watched a video online with a master chef using his stone, and he sharpened his knife for 10 minutes on each stone before moving up to a finer grit. I took this hint, and used sharpened my knife on each side of this stone for 10 minutes, which led to perfection.
The word “Novaculite” is derived from the Latin word “novacula”, which means “razor stone” and is essentially a metamorphic, recrystallized, variety of Chert composed mostly of microcrystalline quartz that is found in the found in the Ouachita Mountains of Arkansas and Oklahoma and in the Marathon Uplift of  Deposited in the Devonian Period and the early Mississippian Subperiod some 410 to 325 million years ago and subjected to uplift and folding during the Ouachita orogeny of the Atokan Epoch (early Pennsylvanian Subperiod), Novaculite is a very tough stone that is resistant to erosion and thus, the various layers of Novaculite stand out as ridges in the Ouachita Mountains. Thus, due to both its availability and its composition, it has been mined since ancient times for use as arrowheads and spear heads as well as in more modern times for use as sharpening stones.
Using the strength of industrial high precision superior mono-crystalline diamonds, Diamond Machining Technology (DMT) have created a durable longer-lasting flat sharpening surface that will efficiently sharpen, hone, deburr and polish almost any type of knife or cutting tool. The DMT set contains 3 one-sided whetstones that have extra-fine, fine, and coarse grits which means you have a complete sharpening system at your fingertips.
Silicone Carbide whetstones on the other hand, are the fastest cutting of the three types of oil stones and the stones made by Norton are called Crystolon Stones. Also they too are graded as either fine, medium, or coarse stones depending on their grit. But, although these stones will not produce an edge as fine as Arkansas Oil Stones or India Oil Stones, their fast cutting ability makes them ideal for sharpening tools as well as for cutting the initial edge bevel on extremely dull knives or repairing the edge on damaged blades. Last, because they sharpen so quickly, it a common practice to start with a coarse Crystolon Oil Stone and then progress to either a medium or fine India Oil Stone and then to finish with an Arkansas Oil Stone.
You want sharpening stones that will be useful for the majority of your edges now, and that will remain useful as you expand both your tools and your sharpening toolkit in the future. Ending up with duplicate stones or ones that are no longer useful as you gain new knives or tools is a waste of money. The goal is to start with something that will stay with you as your needs develop.

Keep your knife razor-sharp with a high-quality sharpening stone. We offer a wide variety of sharpening stones, such as Arkansas stone, Diamond stone, Bench stone, Water stone and more. Whether you own a pocket knife, a hunting knife or a kitchen knife, a sharpening stone is essential for preventing your blade from becoming dull.  Most of our sharpening stones are lightweight and portable, so you can use them at home or take them with you wherever you go.

We’ve shown you how to keep knives sharp before, and even discussed why water stones are best, but this crash course is quick, fast, and gets to the point. In most cases the most the average person at home can do is either hone their blade with a honing steel, which straightens and lines up the blade’s edge, but it doesn’t sharpen it. Alternatively you could run it through a handheld or electronic sharpener, but depending on the model you use it can do more harm than good.