The paper test - Remove your knife from the sharpener. Grab a piece of notebook paper and hold it vertically in your hand so that one edge is facing straight up. Now take the knife and push it down against this edge. If the blade cuts through without hesitation it’s sharp. If the paper simply crumples beneath the blade instead of cutting the blade needs a bit more work.
Naniwa also makes the Naniwa Traditional line of stones, these are less expensive than the Professional lineup and I believe were created to compete in terms of cost with some other brands such as King that are less expensive, more attractive to some who are just starting and may not want to invest a lot of money. I have tried the Naniwa Traditional 220, 1,000 and 2,000 grit stones and I thoroughly enjoyed them, so if you are considering a less expensive brand to get started, these are also good. I do not like them as much as the Professional line but I do like them, they work, they make the knives sharp.
I recommend keeping two stones in your kit. One with a medium grit (around 800 or so) to perform major sharpening jobs, and one with a fine grit (at least 2,000) to tune the edge to a razor-sharp finish. For real pros, a stone with an ultra-fine grit (8,000 and above) will leave a mirror-like finish on your blade, but most cooks won't notice the difference in terms of cutting ability.
Beginning on the right side of the knife, move from tip to heel and heel to tip, then flip the knife and repeat. For the left side, it’s opposite—start at the top of the stone to reach the heel area completely. So, you will move from heel to tip and then tip to heel. Remember to apply and release pressure as you did earlier, exactly the same as in Step 2, but with light, refining pressure.
DMT® is recognized as the worldwide leader in diamond knife sharpeners and sharpening products, with a diverse product line and reputation for quality and innovation. DMT’s patented and award-winning products are known for their superior quality and versatility, are easy to use, and allow for sharpening in a fraction of the time required by other methods. DMT manufactures a full line of diamond knife sharpeners and other sharpening tools for use in woodworking, culinary arts, gardening, camping, fishing, hunting, outdoor and winter sports, industrial applications and more.
The company is to be commended for including links to instructional videos in the package. Those videos lay out clearly how to get the most from your Whetstone sharpener stone. Once you get up to speed you’ll likely enjoy the process and at the same time achieve professional quality results time and again. Sure, it’s not fancy and doesn’t have a sleek, chrome plated design but it works.
Sharpening on the other hand is reupholstering the furniture or telling the hair stylist to give you a new look. Material is going to be removed from the edge of the blade. There’s no way around it. How much is removed will be a function of just how dull the knife has become or whether you’re sharpening to compensate for a chip in the edge or because the tip has broken off. If your knife is not damaged and you have it sharpened twice a year very little material will be removed each time, yet it may still be enough for you to notice just by looking carefully with the naked eye.
High Grit Stones: These are also known as finishing stones with the number range going up to 8000, and give you a super refined edge. They work great with Western knives as they cutting edge resembles a “U” as opposed to a “V”. If you are using your knife to cut meat, then you can happily stop at 4000 or 6000 grit. If you are only using it for vegetables or fruit go all the way to the 8000.