So, as you can see, there are numerous different types and grades of whetstones on the market today and each has its advantages and disadvantages. Therefore, the right practice to choose the right sharpening stone for you is to choose a whetstone material based upon how fast you need to remove metal and how fine an edge you need. For instance, although they are often the most expensive type of whetstone, diamond hones generally cut the fastest even in their finer grits followed by Crystolon Stones and then India Stones which are then generally followed by Japanese Water Stones and then by Novaculite, Belgian Blue, and Coticule whetstones in terms of how fast they remove metal. However, it should also be noted that the rougher an edge is, the less sharp it is while, the more polished an edge is, the sharper it is and thus, rough edges are fine for some tools while other tools require a much finer edge and, hunting knives require the finest edge of all. Therefore, the trick to choosing the proper whetstone for any given sharpening purpose is to purchase multiple stones with varying grits to accomplish each given task from cutting an initial bevel or defining a damaged edge to refining an existing edge to polishing it. We hope this article helped you. Feel free to leave a comment below if you have questions.

Understanding Grit: You’ll see a bunch of numbers being thrown around when discussing the grit of a sharpening stone. The number refers to the size of the grit. The larger the number, the finer the grit. A good beginner stone would be a two-sided stone with #400 and #1000 grit. The #400 grit is the courser stone for working out the nicks and imperfections, the #1000 grit is for refining.
Sharpening on the other hand is reupholstering the furniture or telling the hair stylist to give you a new look. Material is going to be removed from the edge of the blade. There’s no way around it. How much is removed will be a function of just how dull the knife has become or whether you’re sharpening to compensate for a chip in the edge or because the tip has broken off. If your knife is not damaged and you have it sharpened twice a year very little material will be removed each time, yet it may still be enough for you to notice just by looking carefully with the naked eye.
The Juuma sharpening and honing stones offer a simplified working principle while at the same time ensuring the highest possible quality in the offered grits. Juuma Cobalt Blue stones are made of an aluminium oxide and a bonding agent. Adding cobalt serves to slow stone abrasion and increase the speed of sharpening. The speed bonus is especially marked when stoning blue steel (blue paper steel that is often used for Japanese planes and chisels). The cobalt gives the stones their blue colour. Juuma is our proprietary brand. Juuma sharpening stones are produced by a renowned Japanese whetstone manufacturer.
Before we start, I want to make clear that there are dozens of different ways to sharpen a knife. Everyone has a way they think is best, and men have all sorts  of techniques and tools that they feel are essential in getting a sharp blade. In the end, much of it comes down to personal preference. I’m going to show you the way I learned how to sharpen a pocket knife. It’s very basic, good for beginners, and best of all, it works. If you have an alternative method that you prefer, great. Share it with us in the comments. I’d love to hear your tips.
I had wanted a pair of sharpening stones for a while, so was enthused to get this last week. I watched a bunch of YouTube videos on how to use them and a deburring strop I also bought and wow, my kitchen and pocket knives are now wicked sharp. Pro tip: if you post anything about it on social media, family and friends will almost surely volunteer their knives for more practice...
Cerax and Suehiro stones from Suehiro are a little harder, and as such do not wear down as quickly as the classic Japanese water stones. The 8000 grit stone will perhaps give you the best cutting edge with a mirror polish on chisels and similar blades. Suehiro also makes a small combination stone for those who do not sharpen tools all that often and are reluctant to spend extra for a Cerax stone.
Now move the blade – with a little pressure – in regular movements up and down along the sharpening stone. Always maintain the angle between the blade and stone. You will notice a burr become visible after five or so movements. Mentally divide the blade into three sections if the knife has a large blade. Always start with the tip and work back towards the bolster.
In terms of feedback, in the eyes, and in the hands of many sharpeners, the feedback on this particular brand of stones is not to their liking and often it is enough to stop them from using them. These are thinner than other stones as well so you may get the impression that you are not getting your moneys worth. They are very hard stones, there is no soft, creamy sensation as you sharpen, there is not much feedback at all in fact.
To use Al's method, take a black felt pen and shade in the bevel of the knife. Then take two strokes on the stone and examine the edge. If you have maintained the proper angle then all the black will be gone. If you see black on the top of the edge it means you are holding the back of the knife too far from the stone. If there is black on the bottom of the edge but the top is clean then you are laying the knife too flat on the stone and you need to raise it a bit. Repaint the edge and try it again. Once you discover what the right angle looks like then just maintain that.
Some of the videos I watched suggested soaking the stone for 12-15 minutes prior to use. One suggested using vegetable oil on the surface versus water/soaking (I used water and presoaking it for 15-minutes). So instead of a simple 'out-of-the-box-and-use' approach, it required a bit of research before sharpening a knife. Otherwise I would have given this product a 5-star rating.