The dual-sided whetstone is made from durable silicon carbide and has 400 grit on one side to sharpen the dullest blades and 1000 grit on the other side to create a nice smooth finish once the blade has been sharpened. The stone also forms a nice slurry that helps polish the blade for a superb shine. The stone is meant to be used with water, not oil and for best results, simply soak stone for 5-10 minutes before use, and lubricate with additional water as needed when sharpening.
When sharpening a knife, you're actually grinding away the existing blade to create a new edge. This is evidenced by the fact that upon completion, you can find tiny metal filings, called swarf, when wiping down the stone. Because the metal blade is actually being ground away, a high importance is placed on the technique and consistency of drawing a knife over the stone.
In summary: Peter Nowlan is a professional knife sharpener based in Halifax (Canada) and he recommends the KnifePlanet Sharpening Stone Set, a beginners and intermediate kit that includes 4 sharpening grits: 400/1000, 3000/8000, a bamboo base and the KnifePlanet Flattening Stone. The Japanese Naniwa 3-stone combination is also a great (and more expensive) choice, ideal for professionals and more advanced sharpeners: the Naniwa stones are slightly bigger compared to KnifePlanet’s. In both cases, a coarse, medium and fine grit combination is very effective to sharpen and refine the edge:
Whetstone sharpener or sharpening stone has been here and there for a long time even before we born in the form of natural stone whatever they look like. Until today, the natural stone likely to be the most preferred options to sharpening things because of their versatility. As the technology improves, there are immerging new models and we are now not only having an option to the natural stone, but there are also other types considered better and more practical to use. The arrays can be bewildering to the inexperienced sharpeners that so often times many of them end up with a crap or wrong decision on stone type for their utensils.
Honing steels are another story altogether. Honing steels are those instruments that look light a saber (light or otherwise) which you use to gussy up the edge of the blade periodically before using it. These do wear out every few years or less, depending on how often you use them. If you are unsure whether your honing steel is worn out run your finger around it. If it feels smooth all the way around then it’s time for a replacement. Not to worry though, they’re really affordable. One thing you may want to keep in mind about honing steels is that they typically won’t do much to hone the edge of some super hard knives, such as Japanese Global brand knives.
Be careful: Don’t move your fingers laterally along the edge, you’ll cut yourself. Feel for a rough area running from tip to heel. Again, it takes time to know what to expect because the best burr will be subtle. Just know that the bigger the burr, the more metal you are removing—more than necessary. Don’t worry, you won’t ruin the knife doing this. You’re learning here, and mistakes are part of the sharpening journey. Learn from them.
DMT® is recognized as the worldwide leader in diamond knife sharpeners and sharpening products, with a diverse product line and reputation for quality and innovation. DMT’s patented and award-winning products are known for their superior quality and versatility, are easy to use, and allow for sharpening in a fraction of the time required by other methods. DMT manufactures a full line of diamond knife sharpeners and other sharpening tools for use in woodworking, culinary arts, gardening, camping, fishing, hunting, outdoor and winter sports, industrial applications and more.