In terms of feedback, in the eyes, and in the hands of many sharpeners, the feedback on this particular brand of stones is not to their liking and often it is enough to stop them from using them. These are thinner than other stones as well so you may get the impression that you are not getting your moneys worth. They are very hard stones, there is no soft, creamy sensation as you sharpen, there is not much feedback at all in fact.
I recommend keeping two stones in your kit. One with a medium grit (around 800 or so) to perform major sharpening jobs, and one with a fine grit (at least 2,000) to tune the edge to a razor-sharp finish. For real pros, a stone with an ultra-fine grit (8,000 and above) will leave a mirror-like finish on your blade, but most cooks won't notice the difference in terms of cutting ability.
Steeling helps maintain sharpness. This process realigns the edge, correcting for dulling causes such as a rolled edge. A sharpening steel is a type of hardened cylindrical rod used similarly to honing stones. For example, a butcher steel is a round file with the teeth running the long way, while a packer steel (used in the meat packer's industry) is a smooth, polished steel rod designed for straightening the turned edge of a knife,[7] and is also useful for burnishing a newly finished edge. Because steels have a small diameter they exert high local pressure, and therefore affect the knife metal when used with very little force. They are intended for mild steel knives that are steeled several times a day, but are not well suited for today's tougher and harder blade steels. Diamond steels are now available that have an industrial diamond coating and can remove blade metal as well as straighten, therefore used correctly they can re-profile a knife instead of just honing.